Guia A a Z para Thermodinâmicas, Transferência de calor e massa, e Engenharia de Fluidos
Português English Русский 中文 Español Français Deutsch Sobre Editores Contato Acesso Begell House
Artigos Autores

Mujumdar, Arun S.

Department of Chemical Engineering, McGill University, Montreal, Canada; National University of Singapore 9 Engineering Drive 1
Singapore 117576

Heat transfer coefficient, Melting

Life Fellow, ASME , Honorary Fellow,IICHE
PhD(McGill), Doctor Honoris Causa (Lodz, Poland) and Lyon1(Lyon,France)
Adjunct Professor, Department of Bioresource Engineering. And Department of Mining & Material Science, McGill University, Montreal, Canada

Adjunct Research Professor, Western University, London, Ontario, Canada

Distinguished Professor of Food Engineering, KMUTT, Bangkok, Thailand

Honorary Professor, University of Queensland, Australia

Honorary Professor, Jiangnan University, Wuxi, China

Honorary Professor, Tianjin University of Science and Technology, China

Distinguished Professor, Institute of Chemical Technology, Mumbai , India

Emeritus Professor, NIFTEM, Kundli, India
Handbook of industrial drying
Crc Press 1658* 2014
Heat transfer characteristics of nanofluids: a review
XQ Wang, AS Mujumdar
International journal of thermal sciences 46 (1), 1-19 1297 2007
Trends in microwave-related drying of fruits and vegetables
M Zhang, J Tang, AS Mujumdar, S Wang
Trends in Food Science & Technology 17 (10), 524-534 432 2006
Advanced drying technologies
T Kudra, AS Mujumdar
CRC Press 406 2009
Fluid dynamics: theoretical and computational approaches
ZUA Warsi
CRC press 388 2005
A review on nanofluids-part I: theoretical and numerical investigations
XQ Wang, AS Mujumdar
Brazilian Journal of Chemical Engineering 25 (4), 613-630 268 2008
A review on nanofluids-part II: experiments and applications
XQ Wang, AS Mujumdar
Brazilian Journal of Chemical Engineering 25 (4), 631-648 231 2008
Numerical flow and heat transfer under impinging jets: a review
S Polat, B Huang, AS Mujumdar, WJM Douglas
Annual Review of Heat Transfer 2 (2) 217 1989
Drying of solids: principles, classification, and selection of dryers
AS Mujumdar, AS Menon
Handbook of industrial drying 1, 1-39 183 1995
Sludge dewatering and drying
G Chen, P Lock Yue, AS Mujumdar
Drying Technology 20 (4-5), 883-916 166 2002
Transport properties in the drying of solids
D Marinos-Kouris, ZB Maroulis
Handbook of industrial drying 1, 113-159 165 1995
Low-rank coal drying technologies—Current status and new developments
M Karthikeyan, W Zhonghua, AS Mujumdar
Drying Technology 27 (3), 403-415 160 2009
Flow and heat transfer for gas flowing in microchannels: a review
AA Rostami, AS Mujumdar, N Saniei
Heat and Mass Transfer 38 (4-5), 359-367 157 2002
Sonochemical decomposition of volatile and non-volatile organic compounds—a comparative study
M Goel, H Hongqiang, AS Mujumdar, MB Ray
Water Research 38 (19), 4247-4261 149 2004
Models for sorption isotherms for foods: a review
S Basu, US Shivhare, AS Mujumdar
Drying technology 24 (8), 917-930 146 2006
Solar drying of foods: modeling and numerical simulation
C Ratti, AS Mujumdar
Solar energy 60 (3), 151-157 137 1997
Transient cooling of electronics using phase change material (PCM)-based heat sinks
R Kandasamy, XQ Wang, AS Mujumdar
Applied Thermal Engineering 28 (8), 1047-1057 136 2008
Infrared drying
C Ratti, AS Mujumdar
Handbook of industrial drying 1, 567-588 135 1995
Drying technology: Trends and applications in postharvest processing
AS Mujumdar, CL Law
Food and Bioprocess Technology 3 (6), 843-852 132 2010
Batch drying of banana pieces—effect of stepwise change in drying air temperature on drying kinetics and product colour
KJ Chua, AS Mujumdar, MNA Hawlader, SK Chou, JC Ho
Food Research International 34 (8), 721-731 131 2001
A comparative study of low-pressure superheated steam and vacuum drying of a heat-sensitive material
S Devahastin, P Suvarnakuta, S Soponronnarit, AS Mujumdar
Drying Technology 22 (8), 1845-1867 129 2004
Convective drying of banana, guava and potato pieces: Effect of cyclical variations of air temperature on drying kinetics and color change
KJ Chua, AS Mujumdar, SK Chou, MNA Hawlader, JC Ho
Drying technology 18 (4-5), 907-936 129 2000
Intermittent drying of bioproducts––an overview
KJ Chua, AS Mujumdar, SK Chou
Bioresource Technology 90 (3), 285-295 121 2003
Research and development in drying: Recent trends and future prospects
AS Mujumdar
Drying Technology 22 (1-2), 1-26 120 2004
Drying of edamames by hot air and vacuum microwave combination
Q Hu, M Zhang, AS Mujumdar, G Xiao, S Jin-cai
Journal of Food Engineering 77 (4), 977-982 119 2006
Studies on hot air and microwave vacuum drying of wild cabbage
X Yanyang, Z Min, AS Mujumdar, Z Le-qun, S Jin-cai
Drying Technology 22 (9), 2201-2209 119 2004
Handbook of industrial drying
RS Sokhansanj, DS Jayas
Marcel Dekker, New York 119 1987
Application of phase change materials in thermal management of electronics
R Kandasamy, XQ Wang, AS Mujumdar
Applied Thermal Engineering 27 (17), 2822-2832 118 2007
A comparative study of five low Reynolds number k–? models for impingement heat transfer
SJ Wang, AS Mujumdar
Applied thermal engineering 25 (1), 31-44 112 2005
Basic process calculations in drying
Z Pakowski, AS Mujumdar
Handbook of industrial drying 1, 71-111 111 1995
Drying technology in agriculture and food sciences.
AS Mujumdar
Drying technology in agriculture and food sciences 110 2000
Effect of semi-confinement on impingement heat transfer
NT Obot, WJM Douglas, AS Mujumdar
Heat Transfer 1982, Volume 3 3, 395-400 107 1982
Drying technologies in food processing
John Wiley & Sons 106 2009
Industrial Crystallization
S Palosaari, Z Sha, M Louhi-Kultanen
Handbook of Industrial Drying, Third Edition 96 2006
Degradation of ascorbic acid in dried guava during storage
MS Uddin, MNA Hawlader, L Ding, AS Mujumdar
Journal of Food Engineering 51 (1), 21-26 96 2002
Industrial spray drying systems
I Filkova, AS Mujumdar
Handbook of industrial drying 1, 263-308 92 1995
Simulation of a spray dryer fitted with a rotary disk atomizer using a three-dimensional computional fluid dynamic model
L Huang, K Kumar, AS Mujumdar
Drying Technology 22 (6), 1489-1515 90 2004
Comparative evaluation of different turbulence models for confined impinging and opposing jet flows
SM Hosseinalipour, AS Mujumdar
Numerical Heat Transfer, Part A: Applications 28 (6), 647-666 88 1995
Drying of exotic tropical fruits: a comprehensive review
FAN Fernandes, S Rodrigues, CL Law, AS Mujumdar
Food and Bioprocess Technology 4 (2), 163-185 86 2011
Simulation of convection-microwave drying for a shrinking material
ECM Sanga, AS Mujumdar, GSV Raghavan
Chemical Engineering and Processing: Process Intensification 41 (6), 487-499 85 2002
Use of neural network to predict industrial dryer performance
B Huang, AS Mujumdar
Drying Technology 11 (3), 525-541 85 1993
Recent advances in dewatering through immersion in concentrated solutions (‘Osmotic dehydration ‘)
AL Raoult-Wack, A Lenart, S Guilbert
Drying of solids, 21 85 1992
Non-iterative estimation of heat transfer coefficients using artificial neural network models
SS Sablani, A Kacimov, J Perret, AS Mujumdar, A Campo
International Journal of Heat and Mass Transfer 48 (3), 665-679 81 2005
Effect of cohesive forces on fluidized and spouted beds of wet particles
ML Passos, AS Mujumdar
Powder Technology 110 (3), 222-238 81 2000
Use of computational fluid dynamics to evaluate alternative spray dryer chamber configurations
L Huang, K Kumar, AS Mujumdar
Drying Technology 21 (3), 385-412 80 2003
A comparative study of a spray dryer with rotary disc atomizer and pressure nozzle using computational fluid dynamic simulations
LX Huang, K Kumar, AS Mujumdar
Chemical Engineering and Processing: Process Intensification 45 (6), 461-470 78 2006
Drying Kinetics and ??Carotene Degradation in Carrot Undergoing Different Drying Processes
P Suvarnakuta, S Devahastin, AS Mujumdar
Journal of Food Science 70 (8), s520-s526 78 2005
Fundamental principles of drying
AS Mujumdar, S Devahastin
Exergex, Brossard, Canada 78 2000
Microwave Drymg of Grapes in a Single Mode Cavity at 2450 Mhz-i: Drying Kinetics
TN Tulasidas, GSV Raghavan, AS Mujumdar
Drying Technology 13 (8-9), 1949-1971 78* 1995
Theory and application of vibrated beds and vibrated fluid beds for drying processes
Z Pakowski, AS Mujumdar, C Strumillo
Advances in drying 3, 245-306 78 1984
Comparison of four drying methods for re-structured mixed potato with apple chips
L Huang, M Zhang, AS Mujumdar, R Lim
Journal of Food Engineering 103 (3), 279-284 76 2011
Microwave freeze drying of sea cucumber (Stichopus japonicus)
X Duan, M Zhang, AS Mujumdar, S Wang
Journal of Food Engineering 96 (4), 491-497 76 2010
Thermal characteristics of tree-shaped microchannel nets for cooling of a rectangular heat sink
XQ Wang, AS Mujumdar, C Yap
International Journal of Thermal Sciences 45 (11), 1103-1112 76 2006
Vacuum frying of carrot chips
L Fan, M Zhang, AS Mujumdar
Drying technology 23 (3), 645-656 76 2005
Osmotic dehydration pretreatment in drying of fruits and vegetables
YK Pan, LJ Zhao, Y Zhang, G Chen, AS Mujumdar
Drying Technology 21 (6), 1101-1114 76 2003
DRYING TECHNOLOGIES OF THE FUTURE: This paper was presented as a Plenary Lecture at the CHISA'90 Congress (10th International Congress of Chemical Engineering, Equipment Design and Automation), Prague, Czechoslovakia, August 1990
AS Mujumdar
Drying Technology 9 (2), 325-347 76 1991
Computational study of impingement heat transfer under a turbulent slot jet
Y Shi, MB Ray, AS Mujumdar
Industrial & Engineering Chemistry Research 41 (18), 4643-4651 75 2002
Enhancement of energy charge-discharge rates in composite slabs of different phase change materials
ZX Gong, AS Mujumdar
International Journal of Heat and Mass Transfer 39 (4), 725-733 75 1996
Prediction of heat transfer under an axisymmetric laminar impinging jet
NR Saad, WJM Douglas, AS Mujumdar
Industrial & Engineering Chemistry Fundamentals 16 (1), 148-154 75 1977
CFD modeling of the gas–particle flow behavior in spouted beds
W Zhonghua, AS Mujumdar
Powder Technology 183 (2), 260-272 74 2008
An overview of innovation in industrial drying: current status and R&D needs
AS Mujumdar
Drying of Porous Materials, 3-18 74 2006
Progress in drying technology for nanomaterials
B Wang, W Zhang, W Zhang, AS Mujumdar, L Huang
Drying Technology 23 (1-2), 7-32 74 2005
Theoretical study of microwave heating patterns on batch fluidized bed drying of porous material
G Chen, W Wang, AS Mujumdar
Chemical Engineering Science 56 (24), 6823-6835 74 2001
A mathematical model for constant and intermittent batch drying of grains in a novel rotating jet spouted bed
RY Jurnah, AS Mujumdar, GSV Raghavan
Drying Technology 14 (3-4), 765-802 73 1996
A numerical study of flow and mixing characteristics of laminar confined impinging streams
S Devahastin, AS Mujumdar
Chemical Engineering Journal 85 (2), 215-223 72 2002
Mathematical modeling and numerical techniques in drying technology
I Turner, AS Mujumdar
Marcel Dekker 72 1997
Aerodynamics of a vibrated fluid bed
R Gupta, AS Mujumdar
The Canadian Journal of Chemical Engineering 58 (3), 332-338 71 1980
A parametric study of the gas flow patterns and drying performance of co-current spray dryer: Results of a computational fluid dynamics study
L Huang, K Kumar, AS Mujumdar
Drying Technology 21 (6), 957-978 70 2003
A critical assessment of industrial coal drying technologies: Role of energy, emissions, risk and sustainability
SV Jangam, M Karthikeyan, AS Mujumdar
Drying Technology 29 (4), 395-407 69 2011
Impingement stream dryers for particles and pastes
T Kudra, AS Mujumdar
Drying Technology 7 (2), 219-266 68 1989
Drying of low-rank coal (LRC)—a review of recent patents and innovations
H Osman, SV Jangam, JD Lease, AS Mujumdar
Drying Technology 29 (15), 1763-1783 67 2011
Thermodynamic optimization of the thermal process in energy storage using multiple phase change materials
ZX Gong, AS Mujumdar
Applied Thermal Engineering 17 (11), 1067-1083 67 1997
Flow and thermal characteristics of steady two dimensional confined laminar opposing jets: Part I. Equal jets
SM Hosseinalipour, AS Mujumdar
International Communications in Heat and Mass Transfer 24 (1), 27-38 66 1997
Spouted bed drying
E Pallai, T Szentmarjay, AS Mujumdar
Handbook of industrial drying 1, 453-488 66 1995
2 Drying Fundamentals
AS Mujumdar
Industrial drying of foods, 7 65 1997
16 Impingement Drying
AS Mujumdar
Handbook of Industrial Drying, 371 64 2014
Spouted bed technology-a brief review
AS Mujumdar
Drying 84, 151-157 64 1984
Special drying techniques and novel dryers
T Kudra, AS Mujumdar
Handbook of industrial drying 2, 1087-1149 63 1995
Numerical analysis of blockage and optimization of heat transfer performance of fractal-like microchannel nets
XQ Wang, AS Mujumdar, C Yap
Journal of electronic packaging 128 (1), 38-45 62 2006
Numerical prediction of the flow field and impingement heat transfer caused by a laminar slot jet
ARP Van Heiningen, AS Mujumdar, WJM Douglas
Journal of Heat Transfer 98 (4), 654-658 62 1976
Heat and mass transfer during drying of a bed of shrinking particles–Simulation for carrot cubes dried in a spout-fluidized-bed drier
I Bia?obrzewski, M Zieli?ska, AS Mujumdar, M Markowski
International Journal of Heat and Mass Transfer 51 (19), 4704-4716 61 2008
Microwave freeze drying of sea cucumber coated with nanoscale silver
X Duan, M Zhang, X Li, AS Mujumdar
Drying Technology 26 (4), 413-419 61 2008
Finite-element analysis of cyclic heat transfer in a shell-and-tube latent heat energy storage exchanger
ZX Gong, AS Mujumdar
Applied Thermal Engineering 17 (6), 583-591 61 1997
Advances in drying
CRC Press 61 1980
Effect of orientation for phase change material (PCM)-based heat sinks for transient thermal management of electric components
XQ Wang, AS Mujumdar, C Yap
International Communications in Heat and Mass Transfer 34 (7), 801-808 60 2007
Effect of spray-dryer operating variables on the whole milk powder quality
VS Birchal, ML Passos, GRS Wildhagen, AS Mujumdar
Drying Technology 23 (3), 611-636 60 2005
Effect of osmotic pre-treatment and infrared radiation on drying rate and color changes during drying of potato and pineapple
M Tan, KJ Chua, AS Mujumdar, SK Chou
Drying Technology 19 (9), 2193-2207 60 2001
Liquid flow and heat transfer in microchannels: a review
AA Rostami, N Saniei, AS Mujumdar
Int. J. Heat Technol 18 (2), 59-68 60 2000
Simulation of the hydrodynamics and drying in a spouted bed dryer
W Zhonghua, AS Mujumdar
Drying Technology 25 (1), 59-74 59 2007
Convective drying of agricultural products. Effect of continuous and stepwise change in drying air temperature
KJ Chua, AS Mujumdar, MNA Hawlader, SK Chou, JC Ho
Drying Technology 19 (8), 1949-1960 59 2001
On the intermittent drying of an agricultural product
SK Chou, KJ Chua, AS Mujumdar, MNA Hawlader, JC Ho
Food and Bioproducts Processing 78 (4), 193-203 59 2000
Studies on the microwave freeze drying technique and sterilization characteristics of cabbage
X Duan, M Zhang, AS Mujumdar
Drying Technology 25 (10), 1725-1731 58 2007
Global R&D needs in drying
AS Mujumdar, LX Huang
Drying Technology 25 (4), 647-658 58 2007
Modelling of a single confined turbulent slot jet impingement using various k—? turbulence models
SH Seyedein, M Hasan, AS Mujumdar
Applied mathematical modelling 18 (10), 526-537 58 1994
Effects of different drying methods on the quality changes of granular edamame
H Qing-Guo, Z Min, AS Mujumdar, D Wei-hua, S Jin-cai
Drying Technology 24 (8), 1025-1032 57 2006
Turbulence parameters in a stirred tank
AS Mujumdar, B Huang, D Wolf, ME Weber, WJM Douglas
The Canadian Journal of Chemical Engineering 48 (5), 475-483 57 1970
Multiphase science and technology
Springer Science & Business Media 56 2013
Intermittent drying of carrot in a vibrated fluid bed: effect on product quality
YK Pan, LJ Zhao, ZX Dong, AS Mujumdar, T Kudra
Drying technology 17 (10), 2323-2340 55 1999
Trends in microwave-assisted freeze drying of foods
X Duan, M Zhang, AS Mujumdar, R Wang
Drying Technology 28 (4), 444-453 54 2010
Spray drying and agglomeration of instant bayberry powder
Z Gong, M Zhang, AS Mujumdar, J Sun
Drying Technology 26 (1), 116-121 54 2007
Turbulent impinging jet heat transfer enhancement due to intermittent pulsation
P Xu, B Yu, S Qiu, HJ Poh, AS Mujumdar
International Journal of Thermal Sciences 49 (7), 1247-1252 53 2010
Study on a combination drying technique of sea cucumber
X Duan, M Zhang, AS Mujumdar
Drying Technology 25 (12), 2011-2019 53 2007
Simulation of liquid diffusion-controlled drying of shrinking thin slabs subjected to multiple heat sources
M Raisul Islam, JC Ho, AS Mujumdar
Drying Technology 21 (3), 413-438 53 2003
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
K Somasundaram, E Birgersson, AS Mujumdar
Journal of Power Sources 203, 84-96 52 2012
A parametric study of phase change material (PCM)-based heat sinks
XQ Wang, C Yap, AS Mujumdar
International Journal of Thermal Sciences 47 (8), 1055-1068 52 2008
Cyclic air temperature drying of guava pieces: effects on moisture and ascorbic acid contents
KJ Chua, SK Chou, JC Ho, AS Mujumdar, MNA Hawlader
Food and Bioproducts Processing 78 (2), 72-78 52 2000
Cyclic heat transfer in a novel storage unit of multiple phase change materials
ZX Gong, AS Mujumdar
Applied Thermal Engineering 16 (10), 807-815 52 1996
8 Fluidized Bed Dryers
CL Law, AS Mujumdar
Handbook of industrial drying, 161 51 2014
Effects of heat exchange condition on hot air production by a chemical heat pump dryer using CaO/H 2 O/Ca (OH) 2 reaction
H Ogura, T Yamamoto, H Kage, Y Matsuno, AS Mujumdar
Chemical Engineering Journal 86 (1), 3-10 51 2002
Analytical study of cyclic temperature drying: effect on drying kinetics and product quality
JC Ho, SK Chou, KJ Chua, AS Mujumdar, MNA Hawlader
Journal of Food Engineering 51 (1), 65-75 51 2002
Free convection heat and mass transfer of non-Newtonian power law fluids with yield stress from a vertical flat plate in saturated porous media
RY Jumah, AS Mujumdar
International communications in heat and mass transfer 27 (4), 485-494 51 2000
Mujumdar's practical guide to industrial drying
AS Mujumdar
Exergex Corporation 51 2000
Drying of pastes in spouted beds of inert particles: Design criteria and modeling
ML Passos, G Massarani, JT Freire, AS Mujumdar
Drying Technology 15 (2), 605-624 51 1997
Turbulent flow and heat transfer from confined multiple impinging slot jets
SH Seyedein, M Hasan, AS Mujumdar
Numerical Heat Transfer, Part A: Applications 27 (1), 35-51 51 1995
Steam drying technologies: Japanese R&D
H Shibata, AS Mujumdar
Drying Technology 12 (6), 1485-1524 51 1994
9 Industrial Spray Drying Systems
I Filková, LX Huang, AS Mujumdar
Handbook of industrial drying, 191 50 2014
Optimization of spray drying of an innovative functional food: fermented mixed juice of carrot and watermelon
AP Mestry, AS Mujumdar, BN Thorat
Drying Technology 29 (10), 1121-1131 50 2011
Studies on dehydration of sapota (Achras zapota)
SV Jangam, VS Joshi, AS Mujumdar, BN Thorat
Drying Technology 26 (3), 369-377 49 2008
A two?stage convective air and vacuum freeze?drying technique for bamboo shoots
Y Xu, M Zhang, D Tu, J Sun, L Zhou, AS Mujumdar
International journal of food science & technology 40 (6), 589-595 49 2005
Flow and thermal characteristics of steady two dimensional confined laminar opposing jets: Part II. Unequal jets
SM Hosseinalipour, AS Mujumdar
International Communications in Heat and Mass Transfer 24 (1), 39-50 49 1997
Effects of vacuum and microwave freeze drying on microstructure and quality of potato slices
R Wang, M Zhang, AS Mujumdar
Journal of Food Engineering 101 (2), 131-139 48 2010
Spouted beds for drying: principles and design considerations
ML Passos, AS Mujumdar, GSV Raghavan
Advances in Drying 4, 359-397 48 1987
Numerical investigation of laminar heat transfer performance of various cooling channel designs
JC Kurnia, AP Sasmito, AS Mujumdar
Applied Thermal Engineering 31 (6), 1293-1304 47 2011
Drying-induced cracks in thin film fabricated from colloidal dispersions
P Xu, AS Mujumdar, B Yu
Drying technology 27 (5), 636-652 47 2009
Handbook of Industrial Drying
AS Mujumdar
47 2006
Optimization of osmotic dehydration of kiwifruit
H Cao, M Zhang, AS Mujumdar, W Du, J Sun
Drying Technology 24 (1), 89-94 47 2006
Handbook of postharvest technology: cereals, fruits, vegetables, tea, and spices
CRC Press 47 2003
Enhanced heat transfer in free convection-dominated melting in a rectangular cavity with an isothermal vertical wall
ZX Gong, S Devahastin, AS Mujumdar
Applied Thermal Engineering 19 (12), 1237-1251 47 1999
Interrupted electroosmotic dewatering of clay suspensions
HR Rabie, AS Mujumdar, ME Weber
Separations Technology 4 (1), 38-46 47 1994
Microwave drying of corn II. Constant power, continuous operation
US Shivhare, GSV Raghavan, RG Bosisio
Transactions of the ASAE 35 (3), 951-957 47* 1992
Radiant-convective drying of osmotic treated agro-products: effect on drying kinetics and product quality
KJ Chua, SK Chou, AS Mujumdar, JC Ho, CK Hon
Food Control 15 (2), 145-158 46 2004
Melting of a phase change material in concentric horizontal annuli of arbitrary cross-section
DB Khillarkar, ZX Gong, AS Mujumdar
Applied Thermal Engineering 20 (10), 893-912 46 2000
Coating and drying defects
EB Gutoff, ED Cohen, AS Mujumdar
Drying Technology 13 (8), 2251-2252 46 1995
Principles and applications of microwave drying
E Sanga, AS Mujumdar, GSV Raghavan
Drying Technology in Agriculture and Food Sciences, 253-289 45 2000
Heat transfer in free convection-dominated melting of a phase change material in a horizontal annulus
KW Ng, ZX Gong, AS Mujumdar
International communications in Heat and mass transfer 25 (5), 631-640 45 1998
Simulation of packed bed drying of foodstuffs with airflow reversal
C Ratti, AS Mujumdar
Journal of Food Engineering 26 (3), 259-271 45 1995
DEFORMATION AND SlRESS ANALYSIS OF POROUS CAPILLARY BODIES DURING INTERMITTENT VOLUMERIC THERMAL DRYING
W Zhang, AS Mujumdar
Drying Technology 10 (2), 421-443 45 1992
Drying characteristics and kinetics of vacuum microwave–dried potato slices
X Song, M Zhang, AS Mujumdar, L Fan
Drying Technology 27 (9), 969-974 44 2009
Studies on decreasing energy consumption for a freeze-drying process of apple slices
L Huang, M Zhang, AS Mujumdar, D Sun, G Tan, S Tang
Drying Technology 27 (9), 938-946 44 2009
An artificial neural network model for prediction of drying rates
MR Islam, SS Sablani, AS Mujumdar
Drying Technology 21 (9), 1867-1884 44 2003
Drying of woody biomass for bioenergy: Drying technologies and optimization for an integrated bioenergy plant
S Pang, AS Mujumdar
Drying Technology 28 (5), 690-701 43 2010
Ultrasonically enhanced osmotic pretreatment of sea cucumber prior to microwave freeze drying
X Duan, M Zhang, X Li, AS Mujumdar
Drying Technology 26 (4), 420-426 43 2008
Thermal drying technologies—Cost-effective innovation aided by mathematical modeling approach
AS Mujumdar, W Zhonghua
Drying Technology 26 (1), 145-153 43 2007
An optimisation framework for drying of heat-sensitive products
JC Ho, SK Chou, AS Mujumdar, MNA Hawlader, KJ Chua
Applied thermal engineering 21 (17), 1779-1798 43 2001
Numerical evaluation of laminar heat transfer enhancement in nanofluid flow in coiled square tubes
AP Sasmito, JC Kurnia, AS Mujumdar
Nanoscale research letters 6 (1), 1 42 2011
Microwave freeze–drying characteristics and sensory quality of instant vegetable soup
R Wang, M Zhang, AS Mujumdar, JC Sun
Drying Technology 27 (9), 962-968 42 2009
Fundamental particle mixing studies in an agitated bed of granular materials in a cylindrical vessel
K Malhotra, AS Mujumdar, H Imakoma, M Okazaki
Powder Technology 55 (2), 107-114 42 1988
Modern Drying Technology, Volume 3: Product Quality and Formulation
E Tsotsas, AS Mujumdar
John Wiley & Sons 41 2011
Effects of geometric parameters on confined impinging jet heat transfer
ZQ Lou, AS Mujumdar, C Yap
Applied Thermal Engineering 25 (17), 2687-2697 41 2005
Flow and heat transfer in convection-dominated melting in a rectangular cavity heated from below
ZX Gong, AS Mujumdar
International Journal of Heat and Mass Transfer 41 (17), 2573-2580 41 1998
Studies on different combined microwave drying of carrot pieces
WQ Yan, M Zhang, LL Huang, J Tang, AS Mujumdar, JC Sun
International journal of food science & technology 45 (10), 2141-2148 40 2010
Effect of bifurcation angle in tree-shaped microchannel networks
XQ Wang, AS Mujumdar, C Yap
Journal of Applied Physics 102 (7), 073530 40 2007
Heat transfer from a pulsed laminar impinging jet
HJ Poh, K Kumar, AS Mujumdar
International communications in heat and mass transfer 32 (10), 1317-1324 40 2005
Novel high-humidity hot air impingement blanching (HHAIB) pretreatment enhances drying kinetics and color attributes of seedless grapes
JW Bai, DW Sun, HW Xiao, AS Mujumdar, ZJ Gao
Innovative Food Science & Emerging Technologies 20, 230-237 39 2013
Study of drying uniformity in pulsed spouted microwave–vacuum drying of stem lettuce slices with regard to product quality
Y Wang, M Zhang, AS Mujumdar, KJ Mothibe, SM Roknul Azam
Drying Technology 31 (1), 91-101 39 2013
CFD evaluation of droplet drying models in a spray dryer fitted with a rotary atomizer
MW Woo, WRW Daud, AS Mujumdar, ZH Wu, MZ Meor Talib, SM Tasirin
Drying Technology 26 (10), 1180-1198 39 2008
A mathematical model for low-pressure superheated steam drying of a biomaterial
P Suvarnakuta, S Devahastin, AS Mujumdar
Chemical Engineering and Processing: Process Intensification 46 (7), 675-683 39 2007
Spray dryers: modeling and simulation
VS Birchal, L Huang, AS Mujumdar, ML Passos
Drying Technology 24 (3), 359-371 39 2006
Free convection heat transfer in horizontal and vertical rectangular cavities filled with nanofluids
XQ Wang, AS Mujumdar, C Yap
International Heat Transfer Conference 13 39 2006
Influence of combination drying methods on composition, texture, aroma and microstructure of apple slices
L Huang, M Zhang, L Wang, AS Mujumdar, D Sun
LWT-Food Science and Technology 47 (1), 183-188 38 2012
Numerical study on melting of paraffin wax with Al 2 O 3 in a square enclosure
AV Arasu, AS Mujumdar
International Communications in Heat and Mass Transfer 39 (1), 8-16 38 2012
Cyclic melting and freezing
M Hasan, AS Mujumdar, ME Weber
Chemical Engineering Science 46 (7), 1573-1587 38 1991
Improved design for heat transfer performance of a novel phase change material (PCM) thermal energy storage (TES)
JC Kurnia, AP Sasmito, SV Jangam, AS Mujumdar
Applied Thermal Engineering 50 (1), 896-907 37 2013
Performance evaluation of a polymer electrolyte fuel cell with a dead-end anode: A computational fluid dynamic study
AP Sasmito, AS Mujumdar
international journal of hydrogen energy 36 (17), 10917-10933 37 2011
Numerical investigation of liquid water cooling for a proton exchange membrane fuel cell stack
AP Sasmito, E Birgersson, AS Mujumdar
Heat Transfer Engineering 32 (2), 151-167 37 2011
A diffusion model for drying of a heat sensitive solid under multiple heat input modes
L Sun, MR Islam, JC Ho, AS Mujumdar
Bioresource technology 96 (14), 1551-1560 37 2005
A three-dimensional simulation of a spray dryer fitted with a rotary atomizer
LX Huang, ML Passos, K Kumar, AS Mujumdar
Drying Technology 23 (9-11), 1859-1873 37 2005
Optimum operating conditions in drying foodstuffs with superheated steam
DM Elustondo, AS Mujumdar, MJ Urbicain
Drying Technology 20 (2), 381-402 37 2002
Effects of variable viscosity and viscous dissipation on laminar convection heat transfer of a power law fluid in the entrance region of a semi-circular duct
SG Etemad, AS Mujumdar
International journal of heat and mass transfer 38 (12), 2225-2238 37 1995
Circulation of particles in two-dimensional spouted beds with draft plates
MI Kalwar, GSV Raghavan, AS Mujumdar
Powder technology 77 (3), 233-242 37 1993
Spouting of two?dimensional beds with draft plates
MI Kalwar, GSV Raghavan, AS Mujumdar
The Canadian Journal of Chemical Engineering 70 (5), 887-894 37 1992
Computational study of forced air-convection in open-cathode polymer electrolyte fuel cell stacks
AP Sasmito, KW Lum, E Birgersson, AS Mujumdar
Journal of Power Sources 195 (17), 5550-5563 36 2010
Optimization of vacuum microwave predrying and vacuum frying conditions to produce fried potato chips
X Song, M Zhang, AS Mujumdar
Drying technology 25 (12), 2027-2034 36 2007
Convective drying with time-varying heat input: Simulation results
MR Islam, JC Ho, AS Mujumdar
Drying technology 21 (7), 1333-1356 36 2003
BATCH DRYING OF GRAINS IN AWELL-MIXED DRYER-EFFECT OF CONTINUOUS AND STEPWISE CHANGE IN DRYING AIR TEMPERATURE
S Devahastin, AS Mujumdar
Transactions of the ASAE 42 (2), 421 36 1999
Optimal off-time in interrupted electroosmotic dewatering
S Gopalakrishnan, AS Mujumdar, ME Weber
Separations Technology 6 (3), 197-200 36 1996
Effect of food ingredient on microwave freeze drying of instant vegetable soup
R Wang, M Zhang, AS Mujumdar
LWT-Food Science and Technology 43 (7), 1144-1150 35 2010
A two-stage vacuum freeze and convective air drying method for strawberries
Y Xu, M Zhang, AS Mujumdar, X Duan, S Jin-cai
Drying Technology 24 (8), 1019-1023 35 2006
Effects of two-dimensional roughness in flow in microchannels
XQ Wang, C Yap, AS Mujumdar
Journal of Electronic Packaging 127 (3), 357-361 35 2005
Some hydrodynamic and mixing characteristics of a pulsed spouted bed dryer
S Devahastin, AS Mujumdar
Powder technology 117 (3), 189-197 35 2001
Drying of clay and nonclay media: Heat and mass transfer and quality aspects
ZX Gong, AS Mujumdar, Y Itaya, S Mori, M Hasatani
Drying Technology 16 (6), 1119-1152 35 1998
Drying'80
AS Mujumdar
International Symposium on Drying 1980: McGill University) 35* 1980
Effect of osmotic dehydration on microwave freeze-drying characteristics and quality of potato chips
R Wang, M Zhang, AS Mujumdar
Drying Technology 28 (6), 798-806 34 2010
Flow and thermal characteristics of offset branching network
XQ Wang, P Xu, AS Mujumdar, C Yap
International Journal of Thermal Sciences 49 (2), 272-280 34 2010
Effect of coating on post-drying of freeze-dried strawberry pieces
L Huang, M Zhang, W Yan, AS Mujumdar, D Sun
Journal of food engineering 92 (1), 107-111 34 2009
Effect of vacuum-microwave predrying on quality of vacuum-fried potato chips
X Song, M Zhang, AS Mujumdar
Drying Technology 25 (12), 2021-2026 34 2007
Flow and mixing characteristics of multiple and multi-set opposing jets
SJ Wang, AS Mujumdar
Chemical Engineering and Processing: Process Intensification 46 (8), 703-712 34 2007
Physical interpretation of solids drying: An overview on mathematical modeling research
W Wang, G Chen, AS Mujumdar
Drying technology 25 (4), 659-668 34 2007
Moisture distribution and dewatering efficiency for wet materials
DJ Lee, JY Lai, AS Mujumdar
Drying Technology 24 (10), 1201-1208 34 2006
A numerical study of heat transfer mechanisms in gas–solids flows through pipes using a coupled CFD and DEM model
J Li, DJ Mason, AS Mujumdar
Drying Technology 21 (9), 1839-1866 34 2003
A new solar receiver thermal store for space-based activities using multiple composite phase-change materials
ZX Gong, AS Mujumdar
Journal of solar energy engineering 117 (3), 215-220 34 1995
Fixed-bed batch drying op bhrinxino particles with this varying drying air conditions
C Ratti, AS Mujumdar
Drying Technology 11 (6), 1311-1335 34 1993
A preliminary study of steam drying of silkworm cocoons
C Shi-Ruo, C Jin-Yong, AS Mujumdar
Drying Technology 10 (1), 251-260 34 1992
Effects of electric and magnetic field on freezing and possible relevance in freeze drying
MW Woo, AS Mujumdar
Drying Technology 28 (4), 433-443 33 2010
A study of coupled heat and mass transfer in composite food products during convective drying
SMA Rahman, MR Islam, AS Mujumdar
Drying Technology 25 (7-8), 1359-1368 33 2007
Drying of coal
J Pikon, AS Mujumdar
Handbook of industrial drying, 993-1016 33 2006
Simulation of fluidized-bed drying of carrot with microwave heating
W Wang, BN Thorat, G Chen, AS Mujumdar
Drying Technology 20 (9), 1855-1867 33 2002
Hydrodynamic characteristics of a rotating jet annular spouted bed
S Devahastin, AS Mujumdar, GSV Raghavan
Powder Technology 103 (2), 169-174 33 1999
A control strategy for a chemical heat pump dryer
H Ogura, T Yamamoto, Y Otsubo, H Ishida, H Kage, AS Mujumdar
Drying technology 23 (6), 1189-1203 32 2005
A numerical study of mixing in a novel impinging stream in-line mixer
S Devahastin, AS Mujumdar
Chemical Engineering and Processing: Process Intensification 40 (5), 459-470 32 2001
Laboratory experiments on electroosmotic dewatering of vegetable sludge and mine tailings
H Chen, AS Mujumdar, GSV Ragbaran
Drying Technology 14 (10), 2435-2445 32 1996
Prediction of the maximum spoutable bed height in two-dimensional spouted beds
ML Passos, AS Mujumdar, VSG Raghavan
Powder technology 74 (2), 97-105 32 1993
Laminar flow and heat transfer in power-law fluids flowing in arbitrary cross-sectional ducts
A Lawal, AS Mujumdar
Numerical heat transfer 8 (2), 217-244 32 1985
Trends in processing technologies for dried aquatic products
Y Wang, M Zhang, AS Mujumdar
Drying Technology 29 (4), 382-394 31 2011
Comparative study of droplet drying models for CFD modelling
MW Woo, WRW Daud, AS Mujumdar, MZM Talib, WZ Hua, SM Tasirin
Chemical Engineering Research and Design 86 (9), 1038-1048 31 2008
Innovation in drying
AS Mujumdar
Drying Technology 14 (6), 1459-1475 31 1996
Laminar flow and heat tranfer from multiple impinging slot jets with an inclined confinement surface
SH Seyedein, M Hasan, AS Mujumdar
International journal of heat and mass transfer 37 (13), 1867-1875 31 1994
Electroosmotic dewatering of bentonite suspensions
S Ju, ME Weber, AS Mujumdar
Separations Technology 1 (4), 214-221 31 1991
Superheated steam drying: A bibliography
P Kumar, AS Mujumdar
Drying Technology 8 (1), 195-205 31 1990
Laminar duct flow and heat transfer to purely viscous non-Newtonian fluids
A Lawal, AS Mujumdar
Advances in transport processes 352 31 1989
Hydrodynamic aspects of conventional and vibrofluidized beds—a comparative evaluation
K Erdesz, AS Mujumdar
Powder technology 46 (2-3), 167-172 31 1986
Design correlations for heat and mass transfer under various turbulent impinging jet configurations
NT Obot, AS Mujumdar, WJM Douglas
Drying'80 1, 338-402 31 1980
Microwave freeze-drying characteristics of banana crisps
H Jiang, M Zhang, AS Mujumdar
Drying Technology 28 (12), 1377-1384 30 2010
A numerical study of flow and mixing characteristics of three-dimensional confined turbulent opposing jets: Unequal jets
SJ Wang, AS Mujumdar
Chemical Engineering and Processing: Process Intensification 44 (10), 1068-1074 30 2005
A numerical investigation of some approaches to improve mixing in laminar confined impinging streams
SJ Wang, S Devahastin, AS Mujumdar
Applied thermal engineering 25 (2), 253-269 30 2005
Guide to industrial drying: Principles, equipment and new developments
AS Mujumdar
Colour Publications Pvt. Limited 30* 2004
Diffusion-controlled batch drying of particles in a novel rotating jet annular spouted bed
S Devahastin, AS Mujumdar, GSV Raghavan
Drying Technology 16 (3-5), 525-543 30 1998
Development of Drying Schedules for One?Side?Heating Drying of Refractory Concrete Slabs Based on a Finite Element Model
ZX Gong, AS Mujumdar
Journal of the American Ceramic Society 79 (6), 1649-1658 30 1996
Superheated steam drying of a single particle in an impinging stream dryer
SM Hosseinalipour, AS Mujumdar
Drying Technology 13 (5-7), 1279-1303 30 1995
Superheated steam drying: principles, practice and potential for use of electricity
Canadian Electrical Association, AS Mujumdar
Canadian Electrical Association 30 1990
Spouted and spout-fluidized beds for gram drying
ML Passos, AS Mujumdar, G Vijaya, VGS Raghavan
Drying technology 7 (4), 663-696 30 1989
Aerodynamic and thermal characteristics of vibrated fluid beds–a review
R Gupta, AS Mujumdar
drying 80, 141-150 30 1980
Simulation of an industrial spray dryer and prediction of off-design performance
L Huang, AS Mujumdar
Drying Technology 25 (4), 703-714 29 2007
Development of a new innovative conceptual design for horizontal spray dryer via mathematical modeling
L Huang, AS Mujumdar
Drying Technology 23 (6), 1169-1187 29 2005
Drying kinetics and inversion temperature in a low-pressure superheated steam-drying system
P Suvarnakuta, S Devahastin, S Soponronnarit, AS Mujumdar
Industrial & engineering chemistry research 44 (6), 1934-1941 29 2005
Drying of a dilute suspension in a revolving flow fluidized bed of inert particles
L Zhao, Y Pan, J Li, G Chen, AS Mujumdar
Drying technology 22 (1-2), 363-376 29 2004
Drying Research?Current State and Future Trends
AS Mujumdar
Developments in Chemical Engineering and Mineral Processing 10 (3?4), 225-246 29 2002
Drying'80 Volume 1: Developments in Drying
AS Mujumdar, HG Schwartzberg
Drying Technology 1 (1), 151-157 29 1983
Effect of salt and sucrose content on dielectric properties and microwave freeze drying behavior of re-structured potato slices
R Wang, M Zhang, AS Mujumdar, H Jiang
Journal of Food Engineering 106 (4), 290-297 28 2011
A novel atmospheric freeze-drying system using a vibro-fluidized bed with adsorbent
SMA Rahman, AS Mujumdar
Drying Technology 26 (4), 393-403 28 2008
Effect of temperature difference on flow and mixing characteristics of laminar confined opposing jets
SJ Wang, S Devahastin, AS Mujumdar
Applied thermal engineering 26 (5), 519-529 28 2006
Techno-economic assessment of potential superheated steam drying applications in Canada
B Woods, H Musain, AS Mujumdar
Canadian Electrical Association 28 1994
Fan selection and stack design for open-cathode polymer electrolyte fuel cell stacks
AP Sasmito, E Birgersson, KW Lum, AS Mujumdar
Renewable Energy 37 (1), 325-332 27 2012
Heat transfer under a pulsed slot turbulent impinging jet at large temperature differences
P Xu, AS Mujumdar, HJ Poh, B Yu
Thermal Science 14 (1), 271-281 27 2010
Thermal characteristics of tree-shaped microchannel nets with/without loops
P Xu, XQ Wang, AS Mujumdar, C Yap, BM Yu
International Journal of Thermal Sciences 48 (11), 2139-2147 27 2009
Handbook of food and bioprocess modeling techniques
CRC Press 27 2006
Numerical study of two-stage horizontal spray dryers using computational fluid dynamics
L Huang, AS Mujumdar
Drying Technology 24 (6), 727-733 27 2006
A study of turbulent mixing of confined impinging streams using a new composite turbulence model
S Devahastin, AS Mujumdar
Industrial & engineering chemistry research 40 (22), 4998-5004 27 2001
Some fundamental attributes of corn and potato drying in microwave fields
J Beke, AS Mujumdar, M Giroux
Drying Technology 15 (2), 539-554 27 1997
Flow, heat transfer and particle drying characteristics in confined opposing turbulent jets: a numerical study
SM Hosseinalipour, AS Mujumdar
Drying Technology 13 (3), 753-781 27 1995
Immersed surface heat transfer in a vibrated fluidized bed
K Malhotra, AS Mujumdar
Industrial & engineering chemistry research 26 (10), 1983-1992 27 1987
Experimental investigation and mechanism analysis on microwave freeze drying of stem lettuce cubes in a circular conduit
Y Wang, M Zhang, AS Mujumdar, KJ Mothibe
Drying Technology 30 (11-12), 1377-1386 26 2012
Influence of green banana flour substitution for cassava starch on the nutrition, color, texture and sensory quality in two types of snacks
Y Wang, M Zhang, AS Mujumdar
LWT-Food science and technology 47 (1), 175-182 26 2012
Numerical evaluation of various thermal management strategies for polymer electrolyte fuel cell stacks
AP Sasmito, E Birgersson, AS Mujumdar
international journal of hydrogen energy 36 (20), 12991-13007 26 2011
Study of the optimisation of puffing characteristics of potato cubes by spouted bed drying enhanced with microwave
W Yan, M Zhang, L Huang, J Tang, AS Mujumdar, J Sun
Journal of the Science of Food and Agriculture 90 (8), 1300-1307 26 2010
Fractal theory on drying: A review
P Xu, AS Mujumdar, B Yu
Drying Technology 26 (6), 640-650 26 2008
Study of residence time distribution in a pilot-scale screw conveyor dryer
SS Waje, AK Patel, BN Thorat, AS Mujumdar
Drying technology 25 (1), 249-259 26 2007
An experimental study of the thermal performance of a screw conveyor dryer
SS Waje, BN Thorat, AS Mujumdar
Drying technology 24 (3), 293-301 26 2006
Mechanical means of enhancing drying rates: Effect on drying kinetics and quality
CK Yong, MR Islam, AS Mujumdar
Drying technology 24 (3), 397-404 26 2006
Flow and heat transfer characteristics of confined noncircular turbulent impinging jets
W Zhao, K Kumar, AS Mujumdar
Drying Technology 22 (9), 2027-2049 26 2004
Numerical study on the effect of cross-flow on turbulent flow and heat transfer characteristics under normal and oblique semi-confined impinging slot jets
Y Shi, MB Ray, AS Mujumdar
Drying technology 21 (10), 1923-1939 26 2003
The effect of moisture content on the conversion of ergosterol to vitamin D in shiitake mushrooms
CO Perera, VJ Jasinghe, FL Ng, AS Mujumdar
Drying technology 21 (6), 1091-1099 26 2003
Adsorption drying of corn in zeolite granules using a rotary drum
Z Alikhan, GSV Raghavan, AS Mujumdar
Drying Technology 10 (3), 783-797 26 1992
Particle flow patterns in a mechanically stirred two-dimensional cylindrical vessel
K Malhotra, AS Mujumdar, M Okazaki
Powder Technology 60 (2), 179-189 26 1990
A study on the heat and mass transfer properties of multiple pulsating impinging jets
P Xu, S Qiu, MZ Yu, X Qiao, AS Mujumdar
International Communications in Heat and Mass Transfer 39 (3), 378-382 25 2012
Innovative hydrocyclone inlet designs to reduce erosion-induced wear in mineral dewatering processes
P Xu, Z Wu, AS Mujumdar, B Yu
Drying Technology 27 (2), 201-211 25 2009
Effect of various pretreatments on the quality of vacuum-fried carrot chips
L Fan, M Zhang, AS Mujumdar
Drying Technology 24 (11), 1481-1486 25 2006
A simulation study on convection and microwave drying of different food products
L Wen Jia, MR Islam, AS Mujumdar
Drying technology 21 (8), 1549-1574 25 2003
The periodic steady state for cyclic energy storage in paraffin wax
VG Jariwala, AS Mujumdar, ME Weber
The Canadian Journal of Chemical Engineering 65 (6), 899-906 25 1987
Analysis of aerodynamics and heat transfer in vibro-fluidized beds
DU Ringer, AS Mujumdar
Drying Technology 2 (4), 449-470 25 1983
Eddy-shedding from a sphere in turbulent free-streams
AS Mujumdar, WJM Douglas
International Journal of Heat and Mass Transfer 13 (10), 1627-1629 25 1970
Evaluation of the heat transfer performance of helical coils of non-circular tubes
JC Kurnia, AP Sasmito, AS Mujumdar
Journal of Zhejiang University SCIENCE A 12 (1), 63-70 24 2011
Software for design and analysis of drying systems
ZX Gong, AS Mujumdar
Drying Technology 26 (7), 884-894 24 2008
Evaluation of fluidized versus spouted bed drying of baker's yeast
S Grabowski, AS Mujumdar, HS Ramaswamy, C Strumillo
Drying technology 15 (2), 625-634 24 1997
Batch drying kinetics of corn in a novel rotating jet spouted bed
RY Jumah, AS Mujumdar, GSV Raghavan
The Canadian Journal of Chemical Engineering 74 (4), 479-486 24 1996
A simulation model for combined impingement and through drying using superheated steam as the drying medium
E Loo, AS Mujumdar
Drying’84, 264-280 24 1984
Dust dispersion and management in underground mining faces
JC Kurnia, AP Sasmito, AS Mujumdar
International Journal of Mining Science and Technology 24 (1), 39-44 23 2014
Physico-chemical changes during different stages of MFD/FD banana chips
H Jiang, M Zhang, AS Mujumdar
Journal of Food Engineering 101 (2), 140-145 23 2010
Application of electrical fields in dewatering and drying
G Chen, AS Mujumdar
Developments in Chemical Engineering and Mineral Processing 10 (3?4), 429-441 23 2002
Dryers for particulate solids, slurries and sheet-form materials
AS Mujumdar
Devahastin S. Mujumdar's Practical Guide to Industrial Drying. Quebec ... 23 2000
Simultaneously developing flow and heat transfer of non-Newtonian fluids in equilateral triangular duct
SG Etemad, AS Mujumdar, R Nassef
Applied mathematical modelling 20 (12), 898-908 23 1996
Osmo-convective drying of grapes
S Grabowski, AS Mujumdar, HS Ramaswamy, C Strumillo
Drying Technology 12 (5), 1211-1219 23 1994
Pressure-drop characteristics for vibrated beds of dry and sticky particles
K Malhotra, L Law-Kwet-Cheong, AS Mujumdar
Powder technology 39 (1), 101-105 23 1984
Effect of calcium ion and microwave power on structural and quality changes in drying of apple slices
GC Wu, M Zhang, AS Mujumdar, R Wang
Drying technology 28 (4), 517-522 22 2010
Tomographic diagnosis of gas maldistribution in gas–solid fluidized beds
AK Patel, SS Waje, BN Thorat, AS Mujumdar
Powder technology 185 (3), 239-250 22 2008
Some recent developments in drying technologies appropriate for postharvest processing
AS Mujumdar
International Journal of Postharvest Technology and Innovation 1 (1), 76-92 22 2006
Effects of prandtl number of impinging jet heat transfer under a semi-confined laminar slot jet
YL Shi, MB Ray, AS Mujumdar
International communications in heat and mass transfer 30 (4), 455-464 22 2003
Drying in cyclones—A review
SA Nebra, MA Silva, AS Mujumdar
Drying Technology 18 (3), 791-832 22 2000
Simulation of hydration/dehydration of CaO/Ca (OH) 2 chemical heat pump reactor for cold/hot heat generation
H Ogura, R Shimojyo, H Kage, Y Matsuno, AS Mujumdar
Drying technology 17 (7-8), 1579-1592 22 1999
Drying paper by impinging jets of superheated steam. Part 2: Comparison of steam and air as drying fluids
JF Bond, AS Mujumdar, ARP Van Heiningen, WJM Douglas
The Canadian Journal of Chemical Engineering 72 (3), 452-456 22 1994
Coupled heat and mass transfer in natural convection under flux condition along a vertical cone
M Hasan, AS Mujumdar
International communications in heat and mass transfer 11 (2), 157-172 22 1984
Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks
AP Sasmito, JC Kurnia, AS Mujumdar
Energy 44 (1), 278-291 21 2012
?????????????????????
???? ???
??????? 27 (1), 43-46 21 2007
Computational fluid dynamic simulation of droplet drying in a spray dryer
L Huang, K Kumar, AS Mujumdar
Proceedings of the 14th International Drying Symposium, 326-333 21 2004
Effects of Prandtl number on impinging jet heat transfer under a semi-confined turbulent slot jet
Y Shi, MB Ray, AS Mujumdar
International communications in heat and mass transfer 29 (7), 929-938 21 2002
Modelling the moisture and temperature distribution within an agricultural product undergoing time-varying drying schemes
KJ Chua, SK Chou, MNA Hawlader, AS Mujumdar, JC Ho
Biosystems Engineering 81, 99-112 21 2002
EFFECT OF A TEMPERING PERIOD ON DRYING OF CARROT IN A VffiRO-FLUlDIZED BED
YK Pan, H Wu, ZY Li, AS Mujumdar, T Kudra
Drying technology 15 (6-8), 2037-2043 21 1997
A two-dimensional finite element model for wheat drying in a novel rotating jet spouted bed
ZX Gong, S Devahastin, AS Mujumdar
Drying technology 15 (2), 575-592 21 1997
Novel drying technologies for particulates, slurries and pastes
T Kudra
Drying 92, 224-239 21 1992
Heat transfer under multiple turbulent slot jets impinging on a flat plate
NR Saad, AS Mujumdar, WJM Douglas
Drying'80 1, 422-430 21 1980
Microwave-assisted pulse-spouted bed freeze-drying of stem lettuce slices—Effect on product quality
Y Wang, M Zhang, AS Mujumdar, KJ Mothibe
Food and bioprocess technology 6 (12), 3530-3543 20 2013
Some approaches to improve ventilation system in underground coal mines environment–A computational fluid dynamic study
AP Sasmito, E Birgersson, HC Ly, AS Mujumdar
Tunnelling and Underground Space Technology 34, 82-95 20 2013
Mass transfer modeling and shrinkage consideration during osmotic dehydration of fruits and vegetables
H Nahimana, M Zhang, AS Mujumdar, Z Ding
Food reviews international 27 (4), 331-356 20 2011
Interface thermal characteristics of flip chip packages–A numerical study
R Kandasamy, AS Mujumdar
Applied Thermal Engineering 29 (5), 822-829 20 2009
Thermal analysis of a flip chip ceramic ball grid array (CBGA) package
R Kandasamy, AS Mujumdar
Microelectronics Reliability 48 (2), 261-273 20 2008
Laminar heat transfer in constructal microchannel networks with loops
XQ Wang, C Yap, AS Mujumdar
Journal of Electronic Packaging 128 (3), 273-280 20 2006
Fluidized bed drying
A Mujumdar, CL Law
20 2006
Innovation in drying technologies
AS Mujumdar, ML Passos
Drying Technology in Agriculture and Food Sciences, 291-310 20 2000
Dimensionless correlations for convective heat transfer to liquid and particles in cans subjected to end-over-end rotation
SS Sablani, HS Ramaswamy, AS Mujumdar
Journal of food engineering 34 (4), 453-472 20 1997
Drying of a root crop in vibro-fluidized beds
YK Pan, ZY Li, AS Mujumdar, T Kudra
Drying technology 15 (1), 215-223 20 1997
Bubble phenomena in aerated vibrated beds of small particles
ERA Eccles, AS Mujumdar
Drying technology 15 (1), 95-116 20 1997
Analytical modeling of sheet flutter
AS Mujumdar, WJM Douglas
SVENSK PAPPERSTIDNING-NORDISK CELLULOSA 79 (6), 187-192 20 1976
Model for sludge cake drying accounting for developing cracks
JP Hsu, T Tao, A Su, AS Mujumdar, DJ Lee
Drying Technology 28 (7), 922-926 19 2010
Climate change and drying of agricultural products
RD Piacentini, AS Mujumdar
Drying technology 27 (5), 629-635 19 2009
Effect of power ultrasound pretreatment on edamame prior to freeze drying
HS Xu, M Zhang, X Duan, AS Mujumdar, J Sun
Drying Technology 27 (2), 186-193 19 2009
Pulse combustion characteristics of various gaseous fuels
W Zhonghua, AS Mujumdar
Energy & Fuels 22 (2), 915-924 19 2008
Influence of drying processes on agglomeration and grain diameters of magnesium oxide nanoparticles
B Wang, W Zhang, W Zhang, C Yu, G Wang, L Huang, AS Mujumdar
Drying Technology 25 (4), 715-721 19 2007
Dehydration of products of biological origin
AS Mujumdar
Science Publishers 19 2004
Packaging of fruits and vegetables
B Ranganna, HS Ramaswamy, JP Smith, GS Vijaya Raghavan
Handbook of Postharvest Technology: Cereals, Fruits, Vegetables, Tea, and ... 19 2003
Effect of large temperature differences on local Nusselt number under turbulent slot impingement jet
Y Shi, MB Ray, AS Mujumdar
Drying technology 20 (9), 1803-1825 19 2002
Performance characteristics of the vibrated fluid bed of inert particles for drying of liquid feeds
YK Pan, JG Li, LJ Zhao, WH Ye, AS Mujumdar, T Kudra
Drying technology 19 (8), 2003-2018 19 2001
Electrokinetically enhanced vacuum dewatering of mineral slurries
S Gopalakrishnan, AS Mujumdar, ME Weber, PM Pirkonen
Filtration & separation 33 (10), 929-932 19 1996
The effects of viscous dissipation on heat transfer to power law fluids in arbitrary cross-sectional ducts
A Lawal, AS Mujumdar
Wärme-und Stoffübertragung 27 (7), 437-446 19 1992
Solar-assisted osmotic dehydration
S Grabowski, AS Mujumdar
Drying. Elsevier, Amsterdam 19 1992
Swell drying: coupling instant controlled pressure drop DIC to standard convection drying processes to intensify transfer phenomena and improve quality—an overview
S Mounir, T Allaf, AS Mujumdar, K Allaf
Drying Technology 30 (14), 1508-1531 18 2012
A novel flow reversal concept for improved thermal management in polymer electrolyte fuel cell stacks
AP Sasmito, E Birgersson, AS Mujumdar
International Journal of Thermal Sciences 54, 242-252 18 2012
Comparison of three microwave?assisted drying methods on the physiochemical, nutritional and sensory qualities of re?structured purple?fleshed sweet potato granules
P Liu, M Zhang, AS Mujumdar
International Journal of Food Science & Technology 47 (1), 141-147 18 2012
The effect of svelteness on the bifurcation angles role in pressure drop and flow uniformity of tree-shaped microchannels
H Ghaedamini, MR Salimpour, AS Mujumdar
Applied Thermal Engineering 31 (5), 708-716 18 2011
Dewatering and drying in mineral processing industry: Potential for innovation
ZH Wu, YJ Hu, DJ Lee, AS Mujumdar, ZY Li
Drying Technology 28 (7), 834-842 18 2010
Investigation of flow behaviors and bubble characteristics of a pulse fluidized bed via CFD modeling
Z Li, W Su, Z Wu, R Wang, AS Mujumdar
Drying Technology 28 (1), 78-93 18 2009
Baking of flat bread in an impingement oven: An experimental study of heat transfer and quality aspects
S Banooni, SM Hosseinalipour, AS Mujumdar, E Taheran, M Bahiraei, ...
Drying Technology 26 (7), 902-909 18 2008
Applications for fluidized bed drying
AS Mujumdar, S Devahastin
CHEMICAL INDUSTRIES-NEW YORK-MARCEL DEKKER-, 469-484 18 2003
Enhancement of energy efficiency of a chemical heat pump-assisted convective dryer
H Ogura, H Ishida, H Kage, AS Mujumdar
Drying technology 21 (2), 279-292 18 2003
A three dimensional model for heat and mass transfer in convective wood drying
AD Dedic, AS Mujumdar, DK Voronjec
Drying technology 21 (1), 1-15 18 2003
Experimental studies on a novel chemical heat pump dryer using a gas–solid reaction
H Ogura, H Ishida, R Yokooji, H Kage, Y Matsuno, AS Mujumdar
Drying Technology 19 (7), 1461-1477 18 2001
Classification and selection of industrial dryers
AS Mujumdar
Mujumdar’s Practical Guide to Industrial Drying: Principles, Equipment and ... 18 2000
Drying of grains in a drafted two dimensional spouted bed
MI Kalwar, T Kudra, GSV Raghavan, AS Mujumdar
Journal of Food Process Engineering 13 (4), 321-332 18 1991
Particle mixing and solids flowability in granular beds stirred by paddle-type blades
K Malhotra, AS Mujumdar
Powder Technology 61 (2), 155-164 18 1990
Drying of solids
AS Mujumdar
Halsted press 18* 1986
The dynamics of energy storage for paraffin wax in cylindrical containers
AS Menon, ME Weber, AS Mujumdar
The Canadian Journal of Chemical Engineering 61 (5), 647-653 18 1983
Drying of wood: principles and practices
AS Mujumdar, P Perré, RB Keey
Handbook of Industrial Drying, Fourth Edition, 797-846 17 2014
Analysis of a model for pH-sensitive hydrogels
JC Kurnia, E Birgersson, AS Mujumdar
Polymer 53 (2), 613-622 17 2012
Convective drying kinetics and physical properties of silver carp (Hypophthalmichthys molitrix) fillets
Y Wang, M Zhang, AS Mujumdar
Journal of Aquatic Food Product Technology 20 (4), 361-378 17 2011
Drying characteristics and quality of restructured wild cabbage chips processed using different drying methods
F Zhang, M Zhang, AS Mujumdar
Drying Technology 29 (6), 682-688 17 2011
An overview of the recent advances in spray-drying
AS Mujumdar, LX Huang, XD Chen
Dairy Science & Technology 90 (2-3), 211-224 17 2010
6 Heat pump-assisted drying
MR Islam, AS Mujumdar
Drying technologies in food processing, 190 17 2009
Book Review: Handbook of Industrial Drying: A Review of:“Publisher: CRC Press. Boca Raton, FL, 2007”
AS Mujumdar
Taylor & Francis Group 25 (6), 1133-1134 17 2007
Screw conveyor dryer: Process and equipment design
SS Waje, BN Thorat, AS Mujumdar
Drying Technology 25 (1), 241-247 17 2007
Modeling intermittent drying using an adaptive neuro-fuzzy inference system
R Jumah, AS Mujumdar
Drying technology 23 (5), 1075-1092 17 2005
Energy and cost estimation for application of chemical heat pump dryer to industrial ceramics drying
H Ogura, N Hamaguchi, H Kage, AS Mujumdar
Drying technology 22 (1-2), 307-323 17 2004
Discrete modeling and suggested measurement of heat transfer in gas–solids flows
J Li, GM Campbell, AS Mujumdar
Drying technology 21 (6), 979-994 17 2003
Heat and mass transfer relationship in combined infrared and convective drying
JM Parrouffe, M Dostie, P Navarri, J Andrieu, AS Mujumdar
Drying technology 15 (2), 399-425 17 1997
Handbook of industrial drying
KS Jayaraman, DK Das Gupta, AS Mujumdar
Handbook of industrial drying 1 17 1995
A two-dimensional finite element model for kiln-drying of refractory concrete
ZX Gong, AS Mujumdar
Drying Technology 13 (3), 585-605 17 1995
Effect of particle shape on particle-surface thermal contact resistance.
K Malhotra, AS Mujumdar
Journal of Chemical Engineering of Japan 23 (4), 510-513 17 1990
Simulation of a novel intermittent ventilation system for underground mines
JC Kurnia, AP Sasmito, AS Mujumdar
Tunnelling and Underground Space Technology 42, 206-215 16 2014
Effect of blanching on microwave freeze drying of stem lettuce cubes in a circular conduit drying chamber
Y Wang, M Zhang, AS Mujumdar, KJ Mothibe, SMR Azam
Journal of Food Engineering 113 (2), 177-185 16 2012
Experimental and numerical investigation of spray-drying parameters on the dried powder properties of Ginkgo biloba seeds
CH Zhang, LX Huang, CP Wang, AS Mujumdar
Drying Technology 28 (3), 380-388 16 2010
Moisture adsorption isotherms and glass transition temperature of xanthan gum
S Basu, US Shivhare, AS Mujumdar
Drying Technology 25 (9), 1581-1586 16 2007
A diffusion model for a drum dryer subjected to conduction, convection, and radiant heat input
MR Islam, KS Thaker, AS Mujumdar
Drying technology 25 (6), 1033-1043 16 2007
Performance evaluation of vacuum microwave drying of edamame in deep-bed drying
Q Hu, M Zhang, AS Mujumdar, G Xiao, J Sun
Drying Technology 25 (4), 731-736 16 2007
Finite-element simulation and validation of stepwise drying of bananas
R Ranjan, J Irudayaraj, JN Reddy, AS Mujumdar
Numerical Heat Transfer, Part A 45 (10), 997-1012 16 2004
Recent developments in the drying technologies for the production of particulate materials
AS Mujumdar
Handbook of powder technology 10, 533-545 16 2001
Natural convection heat and mass transfer from a vertical flat plate with variable wall temperature and concentration to power-law fluids with yield stress in a porous medium
RY JUMAH, AS MUJUMDAR
Chemical Engineering Communications 185 (1), 165-182 16 2001
PARTIUE FLOW AND CONTACf HEAT TRANSFER CHARACTERISTICS OF STIRRED GRANULAR BEDS
K Malhotra, AS Mujumdar
Drying Technology 10 (1), 51-80 16 1992
Drying of agricultural products.
GSV Raghavan, AS Mujumdar
Handbook of industrial drying, 555-570 16 1987
An assessment of the accuracy of numerical solutions to the Graetz problem
N Conley, A Lawal, AS Mujumdar
International communications in heat and mass transfer 12 (2), 209-218 16 1985
Forced convection heat transfer to a power?law fluid in arbitrary cross?section ducts
A Lawal, AS Mujumdar
The Canadian Journal of Chemical Engineering 62 (3), 326-333 16 1984
Microwave-assisted pulse-spouted vacuum drying of apple cubes
KJ Mothibe, CY Wang, AS Mujumdar, M Zhang
Drying Technology 32 (15), 1762-1768 15 2014
Analysis of temperature distribution and SEM images of microwave freeze drying banana chips
H Jiang, M Zhang, AS Mujumdar, RX Lim
Food and Bioprocess Technology 6 (5), 1144-1152 15 2013
Laminar convective heat transfer for in-plane spiral coils of non-circular cross section ducts
JC Kurnia, AP Sasmito, AS Mujumdar
Therm Sci 16 (1), 109-118 15 2012
Non-swirling steady and transient flow simulations in short-form spray dryers
MW Woo, WRW Daud, AS Mujumdar, Z Wu, MZM Talib, SM Tasirin
Chemical Product and Process Modeling 4 (1) 15 2009
Baking of flat bread in an impingement oven: modeling and optimization
S Banooni, SM Hosseinalipour, AS Mujumdar, P Taherkhani, M Bahiraei
Drying Technology 27 (1), 103-112 15 2009
Convective drying of Ganoderma tsugae Murrill and effect of temperature on basidiospores
SK Chin, CL Law, CV Supramaniam, PG Cheng, AS Mujumdar
Drying Technology 26 (12), 1524-1533 15 2008
The effect of rotary disk atomizer RPM on particle size distribution in a semi-industrial spray dryer
LX Huang, AS Mujumdar
Drying Technology 26 (11), 1319-1325 15 2008
Modeling convective drying of wet cake
T Tao, XF Peng, A Su, DJ Lee, AS Mujumdar
Journal of the Chinese Institute of Chemical Engineers 39 (3), 287-290 15 2008
R&D needs and opportunities in pulse combustion and pulse combustion drying
W Zhonghua, AS Mujumdar
Drying technology 24 (11), 1521-1523 15 2006
??????????????
???? ??? ???? ???
???????? 6, 27-32 15 2004
Simulation of spray evaporation using pressure and ultrasonic atomizer–a comparative analysis
H Lixin, K Kumar, AS Mujumdar
Tambov. State Tech. Univ 10, 83-100 15 2004
Role of product shrinkage in drying rate predictions using a liquid diffusion model
MR Islam, AS Mujumdar
International communications in heat and mass transfer 30 (3), 391-400 15 2003
Grain drying: basic principles
AS Mujumdar, J Beke
Handbook of Postharvest Technology: Cereals, Fruits, Vegetables, Tea, and ... 15 2003
On the steady?state modelling of a two?stage evaporator system
MNA Hawlader, SK Chou, KJ Chua, JC Ho, AS Mujumdar
International journal of energy research 25 (10), 859-880 15 2001
Water transfer in potato during air drying
F Gög?ü?, M Maskan
Drying technology 16 (8), 1715-1728 15 1998
Numerical simulation of drying of refractory concrete
ZX Gong, B Song, AS Mujumdar
Drying Technology 9 (2), 479-500 15 1991
Impingement heat transfer under a confined slot jet. Part I: Effect of surface throughflow
S Polat, AS Mujumdar, WJM Douglas
The Canadian Journal of Chemical Engineering 69 (1), 266-273 15 1991
A review of press drying
EL Back
Advances in Drying 4, 660-665 15 1987
Vortex shedding from slender cylinders of various cross sections
AS Mujumdar, WJM Douglas
Journal of Fluids Engineering 95 (3), 474-476 15 1973
7 Rotary Drying
M Krokida, D Marinos-Kouris, AS Mujumdar
Handbook of Industrial Drying, 139 14 2014
Computational fluid dynamics (CFD) analysis of micro-reactor performance: Effect of various configurations
H An, A Li, AP Sasmito, JC Kurnia, SV Jangam, AS Mujumdar
Chemical engineering science 75, 85-95 14 2012
Numerical modeling of pulsed laminar opposed impinging jets
S Qiu, P Xu, Z Jiang, AS Mujumdar
Engineering Applications of Computational Fluid Mechanics 6 (2), 195-202 14 2012
Numerical evaluation of transport phenomena in a T-junction microreactor with coils of different configurations
AP Sasmito, JC Kurnia, AS Mujumdar
Industrial & Engineering Chemistry Research 51 (4), 1970-1980 14 2011
Rehydration characteristics of freeze?dried strawberry pieces as affected by whey protein edible coatings
L Huang, M Zhang, W Yan, AS Mujumdar, D Sun
International Journal of Food Science & Technology 46 (4), 671-677 14 2011
Infrared-convective drying of organic pigments
SB Pawar, PSR Kumar, AS Mujumdar, BN Thorat
Drying Technology 26 (3), 315-322 14 2008
A parametric study of spray drying of a solution in a pulsating high-temperature turbulent flow
Z Wu, AS Mujumdar
Drying technology 24 (6), 751-761 14 2006
Dewatering and drying of wastewater treatment sludge
G Chen, PL Yue, AS Mujumdar
Handbook of industrial drying 14 2006
Dehulling and splitting pulses
S Sokhansanj, RT Patil
Handbook of postharvest technology: cereals, fruits, vegetables, tea, and ... 14 2003
A finite element model for convection-dominated melting and solidification problems
ZX Gong, AS Mujumdar
International Journal of Numerical Methods for Heat & Fluid Flow 8 (4), 393-408 14 1998
Non-convergence versus non-conservation in effective heat capacity methods for phase change problems
ZX Gong, AS Mujumdar
International Journal of Numerical Methods for Heat & Fluid Flow 7 (6), 565-579 14 1997
Handbook of industrial drying
T Kudra, AS Mujumdar, AS Mujumdar
by Mujumdar AS, Marcel Dekker, New York, 1087-1149 14 1995
Drying of photosynthetic bacteria in a vibrated fluid bed of solid carriers
YK Pan, JZ Pang, ZY Li, AS Mujumdar, T Kudra
Drying Technology 13 (1-2), 395-404 14 1995
Drying paper by impinging jets of superheated steam. Part 1: Constant drying rate in superheated steam
JF Bond, AS Mujumdar, ARP Van Heiningen, WJM Douglas
The Canadian Journal of Chemical Engineering 72 (3), 446-451 14 1994
Concentration of black liquor to high solids
P Ramamurthy, AS Mujumdar, ARP Van Heiningen, GJ Kubes
Tappi journal 75 (4), 195-202 14 1992
Banana dehydration: osmotic, air and solar effects
CK Sankat, F Castaigne
MUJUMDAR, AS Drying 92, 1679-1688 14 1992
Impingement heat transfer under a confined slot jet. Part II: Effects of surface motion and throughflow
S Polat, AS Mujumdar, WJM Douglas
The Canadian Journal of Chemical Engineering 69 (1), 274-280 14 1991
Applications of vibration techniques for drying and agglomeration in food processing
AS Mujumdar, K Erdesz
Drying Technology 6 (2), 255-274 14 1988
Heat transfer to a power-law fluid in tube flow: Numerical and experimental studies
I Filkova, A Lawal, B Koziskova, AS Mujumdar
Journal of food engineering 6 (2), 143-151 14 1987
Heat transfer distribution under a turbulent impinging jet–a numerical study
S Polat, AS Mujumdar, WJM Douglas
Drying Technology 3 (1), 15-38 14 1985
Advances in drying. Vol. 3
AS Mujumdar
Hemisphere 14 1984
Using high velocity impingement air to improve through drying performance on semi-permeable webs
KR Randall
Drying 84, 254-263 14 1984
Aerodynamic, heat Transfer and Drying in Vibrated Fluid Beds
AS Mujumdar
14 1983
Recent developments in fluidized bed drying
R Gupta, AS Mujumdar
Advances in drying 2, 155-192 14 1983
Flow and heat transfer characteristics of a turbulent slot jet impinging on a moving wall
ARP Van Heiningen, AS Mujumdar, WJM Douglas
Symposium on Turbulent Shear Flows 1, 3.9-3.15 14 1977
20 Superheated Steam Drying
AS Mujumdar
Handbook of industrial drying, 421 13 2014
Energy-efficient thermal drying using impinging-jets

Articles:

NUMERICAL FLOW AND HEAT TRANSFER UNDER IMPINGING JETS: A REVIEW - Vol. 2 '1989 - Annual Review of Heat Transfer

HEAT TRANSFER PROBLEMS IN DRYING - Vol. 1 '1994 - International Heat Transfer Conference 10

LAMINAR FORCED CONVECTION HEAT TRANSFER OF A NON NEWTONIAN FLUID IN THE ENTRANCE REGION OF A SQUARE DUCT WITH DIFFERENT BOUNDARY CONDITIONS - Vol. 10 '1994 - International Heat Transfer Conference 10

CYCLICAL HEAT CONDUCTION IN MELTING AND FREEZING OF COMPOSITE SLABS OF DIFFERENT PHASE CHANGE MATERIALS - Vol. 17 '1994 - International Heat Transfer Conference 10

Solid Flow Patterns and Heat Transfer Characteristics in a Pulsated Fluidized Bed with Flowing Large Bubbles - Vol. 11 '1998 - International Heat Transfer Conference 11

FREE CONVECTIVE HEAT TRANSFER DURING MELTING OF A PHASE CHANGE MATERIAL IN A RECTANGULAR ENCLOSURE: EFFECT OF INCLINATION - Vol. 20 '1998 - International Heat Transfer Conference 11

FREE CONVECTION HEAT TRANSFER IN HORIZONTAL AND VERTICAL RECTANGULAR CAVITIES FILLED WITH NANOFLUIDS - Vol. 0 '2006 - International Heat Transfer Conference 13

HEAT TRANSFER UNDER A LAMINAR SWIRLING IMPINGING JET - A NUMERICAL STUDY - Vol. 5 '1978 - International Heat Transfer Conference 6

EFFECT OF SEMI-CONFINEMENT ON IMPINGEMENT HEAT TRANSFER - Vol. 6 '1982 - International Heat Transfer Conference 7

APPLICATION OF CHEMICAL HEAT PUMP THECHNOLOGY TO INDUSTRIAL DRYING: A PROPOSAL FOR A NEW CHEMICAL HEAT PUMP DRYER - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV

OSMOTIC DEHYDRATION PRETREATMENT IN DRYING OF FRUITS AND VEGETABLES - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV

Gong, Z. X.

FREE CONVECTIVE HEAT TRANSFER DURING MELTING OF A PHASE CHANGE MATERIAL IN A RECTANGULAR ENCLOSURE: EFFECT OF INCLINATION

Etemad, Seyed Gholamreza

LAMINAR FORCED CONVECTION HEAT TRANSFER OF A NON NEWTONIAN FLUID IN THE ENTRANCE REGION OF A SQUARE DUCT WITH DIFFERENT BOUNDARY CONDITIONS

Pan, Y.K.

OSMOTIC DEHYDRATION PRETREATMENT IN DRYING OF FRUITS AND VEGETABLES

Devahastin, S.

FREE CONVECTIVE HEAT TRANSFER DURING MELTING OF A PHASE CHANGE MATERIAL IN A RECTANGULAR ENCLOSURE: EFFECT OF INCLINATION

Obot, N. T.

EFFECT OF SEMI-CONFINEMENT ON IMPINGEMENT HEAT TRANSFER

Kage , Hiroyuki

APPLICATION OF CHEMICAL HEAT PUMP THECHNOLOGY TO INDUSTRIAL DRYING: A PROPOSAL FOR A NEW CHEMICAL HEAT PUMP DRYER

Ogura, Hironao

APPLICATION OF CHEMICAL HEAT PUMP THECHNOLOGY TO INDUSTRIAL DRYING: A PROPOSAL FOR A NEW CHEMICAL HEAT PUMP DRYER

Matsuno, Yoshizo

APPLICATION OF CHEMICAL HEAT PUMP THECHNOLOGY TO INDUSTRIAL DRYING: A PROPOSAL FOR A NEW CHEMICAL HEAT PUMP DRYER

Chen, G.H.

OSMOTIC DEHYDRATION PRETREATMENT IN DRYING OF FRUITS AND VEGETABLES

Yap, Christopher

FREE CONVECTION HEAT TRANSFER IN HORIZONTAL AND VERTICAL RECTANGULAR CAVITIES FILLED WITH NANOFLUIDS

Arai, Norio

FREE CONVECTIVE HEAT TRANSFER DURING MELTING OF A PHASE CHANGE MATERIAL IN A RECTANGULAR ENCLOSURE: EFFECT OF INCLINATION

Zhang, Y.

OSMOTIC DEHYDRATION PRETREATMENT IN DRYING OF FRUITS AND VEGETABLES

Gong, Z. X.

CYCLICAL HEAT CONDUCTION IN MELTING AND FREEZING OF COMPOSITE SLABS OF DIFFERENT PHASE CHANGE MATERIALS

Matsuda, Hitoki

Solid Flow Patterns and Heat Transfer Characteristics in a Pulsated Fluidized Bed with Flowing Large Bubbles

Douglas, W. J. M.

NUMERICAL FLOW AND HEAT TRANSFER UNDER IMPINGING JETS: A REVIEW

HEAT TRANSFER UNDER A LAMINAR SWIRLING IMPINGING JET - A NUMERICAL STUDY

EFFECT OF SEMI-CONFINEMENT ON IMPINGEMENT HEAT TRANSFER

Nishimura, Akira

Solid Flow Patterns and Heat Transfer Characteristics in a Pulsated Fluidized Bed with Flowing Large Bubbles

Deguchi, Seiichi

Solid Flow Patterns and Heat Transfer Characteristics in a Pulsated Fluidized Bed with Flowing Large Bubbles

Zhao , L.J.

OSMOTIC DEHYDRATION PRETREATMENT IN DRYING OF FRUITS AND VEGETABLES

Wang, X. Q.

FREE CONVECTION HEAT TRANSFER IN HORIZONTAL AND VERTICAL RECTANGULAR CAVITIES FILLED WITH NANOFLUIDS

Polat, S.

NUMERICAL FLOW AND HEAT TRANSFER UNDER IMPINGING JETS: A REVIEW

Hasatani, Masanobu

Solid Flow Patterns and Heat Transfer Characteristics in a Pulsated Fluidized Bed with Flowing Large Bubbles

Huang, B.

NUMERICAL FLOW AND HEAT TRANSFER UNDER IMPINGING JETS: A REVIEW

HEAT TRANSFER UNDER A LAMINAR SWIRLING IMPINGING JET - A NUMERICAL STUDY

LAMINAR FORCED CONVECTION HEAT TRANSFER OF A NON NEWTONIAN FLUID IN THE ENTRANCE REGION OF A SQUARE DUCT WITH DIFFERENT BOUNDARY CONDITIONS

Índice A-Z Autores / Editores Mapa semântico Galeria Visual Contribuir Guest