Guia A a Z para Thermodinâmicas, Transferência de calor e massa, e Engenharia de Fluidos
Português English Русский 中文 Español Français Deutsch Sobre Editores Contato Acesso Begell House
Artigos Autores

Meyer, Josua Petrus

Professor and Head of Department
josua.meyer@up.ac.za; jmeyer@up.ac.za

Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, Private Bag X20, Hatfield, 0028, South Africa
Mechanical & Aeronautical Engineering
University of Pretoria Mechanical & Aeronautical Engineering, Pretoria, 0002, Gauteng, SOUTH AFRICA, 0002

Transition, Forced convection, Multiphase flows, Flow patterns, Boiling, Solidification, Heat exchangers

ASME, ASHRAE, AIAA
PhD
Thomas Price, Rand Coal, LT Campbell-Pitt, Literati
Professor and Head: Mechanical & Aeronautical Engineering, University of Pretoria
July 2002 – Present (13 years 6 months)

Prof Josua P Meyer obtained his B.Eng. (cum laude) 1984, M.Eng. (cum laude) 1986, and his Ph.D. (1988) all in Mechanical Engineering from the University of Pretoria. He is registered as a Professional Engineer and he completed his military service at the Faculty of Military Science, University of Stellenbosch where he lectured aerodynamics for pilots in the South African Air Force. After his two years of military service (1988 – 1989), he accepted a position as Associate Professor in the Department of Mechanical Engineering at North-West University in 1990. He was Acting Head and Professor in Mechanical Engineering before accepting a position as professor in the Department of Mechanical and Manufacturing Engineering at the University of Johannesburg in 1994. He was the Chairperson of Mechanical Engineering from 1999 until the end of June 2002 after which he was appointed as Professor and Head of the Department of Mechanical and Aeronautical Engineering of the University of Pretoria from 1 July 2002. He is Chairperson of the School of Engineering since 1 January 2004. He teaches and conducts research in heat transfer, fluid mechanics and thermodynamics.

Professor and Chair: Mechanical Engineering
University of Johannesburg (Rand Afrikaans University)
June 1994 – June 2002 (8 years 1 month)

selected:
Article: Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Conference Paper: Optimisation of Conjugate Elliptical Cooling Channels With Internal Heat Generation
Olabode Thomas Olakoyejo · Tunde Bello-Ochende · Josua Petrus Meyer ·
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013

Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Wall Detached Twisted Tape Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013

Article: Constructal design of combined microchannel and micro pin fins for electronic cooling
O. O. Adewumi · T. Bello-Ochende · J. P. Meyer
International Journal of Heat and Mass Transfer 11/2013; 66:315-323.


Article: Design and optimization of a downhole coaxial heat exchanger for an enhanced geothermal system (EGS)
P. J. Yekoladio · T. Bello-Ochende · J. P. Meyer
Renewable Energy 07/2013; 55:128-137.


Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·

Energy 05/2013; 53:114–127.
Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Energy 05/2013; 53:114–127.

Article: Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density
Surajudeen Olanrewaju Obayopo · Tunde Bello?Ochende · Josua Petrus Meyer
International Journal of Energy Research 03/2013; 37(3).

Article: Constructal multi scale cylinders with rotation cooled by natural convection
L.G. Page · T. Bello-Ochende · J.P. Meyer ·
International Journal of Heat and Mass Transfer 01/2013; 57(1):345–355.


Article: Constructal flow orientation in conjugate cooling channels with internal heat generation
T. Bello-Ochende · O.T. Olakoyejo · J.P. Meyer · A. Bejan · S. Lorente
International Journal of Heat and Mass Transfer 01/2013; 57(1):241–249.


Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
Energy 10/2012; 46:42–50. ·

Article: Constructal optimisation of conjugate triangular cooling channels with internal heat generation
J.P. Meyer · O.T. Olakoyejo · T. Bello-Ochende ·
International Communications in Heat and Mass Transfer 10/2012; 39(8):1093–1100.

Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer·
Energy 10/2012; 46(1):42–50.

Article: Thermodynamic optimisation of the integrated design of a small?scale solar thermal Brayton cycle
W. G. le Roux · T. Bello?Ochende · J. P. Meyer

International Journal of Energy Research 09/2012; 36(11).

Article: Minimization of thermal resistance in an air cooled porous matrix made up of solid spheres with heat generation
J. Baloyi · T. Bello-Ochende · J.P. Meyer ·
International Communications in Heat and Mass Transfer 08/2012; 39(7):966–970.

Conference Paper: Numerical Study and Optimisation of Channel Geometry and Gas Diffusion Layer of a PEM Fuel Cell
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012

Conference Paper: Optimising the Performance of a PEM Fuel Cell With Transverse Fins Insert in the Channel Flow Using Mathematical Algorithm
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012
Conference Paper: Optimum Small-Scale Open and Direct Solar Thermal Brayton Cycle for Pretoria, South Africa
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology; 07/2012

Conference Paper: Numerical analysis of thermal performance of an externally longitudinally finned receiver for parabolic trough solar collector
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
9th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta; 07/2012

Article: Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow
S.O. Obayopo · T. Bello-Ochende · J.P. Meyer ·
International Journal of Hydrogen Energy 07/2012; 37(13):10286–10298.
International Journal of Thermal Sciences 01/2016; 99:238-257.

Article: Three-dimensional analysis and numerical optimization of combined natural convection and radiation heat loss in solar cavity receiver with plate fins insert
Tunde Bello-Ochende · L.C. Ngo · J.P. Meyer
Energy Conversion and Management 09/2015; 101:757-766.

Article: Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation
H. C. Nolte · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 06/2015; 51(6):875-887.

Article: Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output
E. Jansen · T. Bello-Ochende · J.P. Meyer ·
[Energy 05/2015; 86.

Article: Thermodynamic analysis and performance optimization of organic rankine cycles for the conversion of low-to-moderate grade geothermal heat
P. J. Yekoladio · T. Bello?Ochende · J. P. Meyer ·
International Journal of Energy Research 03/2015; 39(9).

Article: Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Applied Thermal Engineering 02/2015; 77.


Article: Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins
L.C. Ngo · T. Bello-Ochende · J.P. Meyer
Renewable Energy 02/2015; 74:95–105.

Article: Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts
Aggrey Mwesigye · Tunde Bello - Ochende · Josua P. Meyer ·
Applied Energy 12/2014; 136(989):1003.

Conference Paper: Thermal performance of a parabolic trough receiver with perforated conical inserts for heat transfer enhancement
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada; 11/2014

Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
The 15th International Heat Transfer Conference, Kyoto Japan; 08/2014

Conference Paper: Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014

Conference Paper: Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014

Article: Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Energy 08/2014; 73:606-617.

Article: The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer ·

Conference Paper: Thermal and thermodynamic analysis of a parabolic trough receiver at different concentration ratios and rim angles
Aggrey Mwesigye · Willem Gabriel Le Roux · Tunde Bello-Ochende · Josua Petrus Meyer
10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Floria; 07/2014

Article: Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bed adiabatic combustor
J. Baloyi · T. Bello-Ochende · J.P. Meyer
Energy 06/2014; 70.

Dataset: Adewumi, Bello-Ochende and Meyer 2013
Josua P. Meyer · O. O. Adewumi · T. Bello-Ochende


Article: Maximum thermal conductance for a micro-channel, utilising Newtonian and non-Newtonian fluid
M. D. Stocks · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 12/2013; 50(6).

Article: A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer ·
Renewable and Sustainable Energy Reviews 12/2013; 28:677-690.

Artigos:

HEAT PUMPS

Editorial Boards:

Journal of Enhanced Heat Transfer

Articles:

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES - Vol. 5 '2019 - 4th Thermal and Fluids Engineering Conference

FLOW PATTERNS DURING CONDENSATION IN SMOOTH AND MICRO-FIN TUBES - Vol. 0 '2003 - Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003

SEMICIRCULAR HEAT EXCHANGERS - Vol. 0 '2003 - Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003

PREFACE: HEFAT2014 - Vol. 12 '2020 - Computational Thermal Sciences: An International Journal

PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS 2012 - Vol. 5 '2013 - Computational Thermal Sciences: An International Journal

PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS 2012 - Vol. 5 '2013 - Computational Thermal Sciences: An International Journal

PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS, 2014 - Vol. 7 '2015 - Computational Thermal Sciences: An International Journal

HEAT TRANSFER OF DEVELOPING FLOW IN THE TRANSITIONAL FLOW REGIME - Vol. 7 '2015 - First Thermal and Fluids Engineering Summer Conference

THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS - Vol. 49 '2018 - Heat Transfer Research

EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS - Vol. 51 '2020 - Heat Transfer Research

GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION - Vol. 0 '2012 - ICHMT DIGITAL LIBRARY ONLINE

A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

Abstract of "A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP" - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE" - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

Abstract of "THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE" - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

Abstract of "THE PERFORMANCE OF THE REFRIGERANTS R-134a, R290, R404A, R-407c AND R-410A IN AIR CONDITIONERS AND REFRIGERATORS" - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

THE PERFORMANCE OF THE REFRIGERANTS R-134a, R290, R404A, R-407c AND R-410A IN AIR CONDITIONERS AND REFRIGERATORS - Vol. 1 '2000 - ICHMT DIGITAL LIBRARY ONLINE

A Matrix-free Implicit Algorithm for Modeling Non-Linear Heat Transfer on Hybrid Unstructured Grids - Vol. 2 '2004 - ICHMT DIGITAL LIBRARY ONLINE

The Characterization of Flow Regimes with Power Spectral Density Distributions of Pressure Fluctuations During Condensation in Smooth and Enhanced Tubes - Vol. 2 '2004 - ICHMT DIGITAL LIBRARY ONLINE

Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation - Vol. 2 '2004 - ICHMT DIGITAL LIBRARY ONLINE

SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS - Vol. 16 '1998 - International Heat Transfer Conference 11

MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE - Vol. 7 '1998 - International Heat Transfer Conference 11

Heat Transfer Coefficients in Concentric Annuli - Vol. 10 '2002 - International Heat Transfer Conference 12

A FAST MATRIX-FREE IMPLICIT UNSTRUCTURED-HYBRID ALGORITHM FOR MODELLING NON-LINEAR HEAT CONDUCTION - Vol. 0 '2006 - International Heat Transfer Conference 13

MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW - Vol. 0 '2006 - International Heat Transfer Conference 13

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL - Vol. 0 '2006 - International Heat Transfer Conference 13

PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT - Vol. 0 '2006 - International Heat Transfer Conference 13

THE SEARCH FOR OBJECTIVE HEAT TRANSFER AND PRESSURE DROP MODELS FOR FLOW CONDENSATION IN HORIZONTAL TUBES - Vol. 0 '2006 - International Heat Transfer Conference 13

THERMAL CHARACTERISATION OF EMBEDDED COOLING LAYERS WITH NEGLIGIBLE THERMAL INTERFACIAL RESISTANCE FOR ORTHOGONAL BI-DIRECTIONAL EXTERNAL HEAT EXTRACTION - Vol. 0 '2006 - International Heat Transfer Conference 13

Heat Transfer in Tubes in the Transitional Flow Regime - Vol. 1 '2014 - International Heat Transfer Conference 15

Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models - Vol. 18 '2014 - International Heat Transfer Conference 15

Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out) - Vol. 18 '2014 - International Heat Transfer Conference 15

Heat Transfer Coefficients for Tubes in the Turbulent Single Phase Flow Regime with a Focus on Uncertainty - Vol. 18 '2014 - International Heat Transfer Conference 15

Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors - Vol. 18 '2014 - International Heat Transfer Conference 15

Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow - Vol. 18 '2014 - International Heat Transfer Conference 15

Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins - Vol. 21 '2014 - International Heat Transfer Conference 15

Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements - Vol. 23 '2014 - International Heat Transfer Conference 15

The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids - Vol. 28 '2014 - International Heat Transfer Conference 15

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a - Vol. 3 '2014 - International Heat Transfer Conference 15

Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube - Vol. 3 '2014 - International Heat Transfer Conference 15

Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT - Vol. 36 '2014 - International Heat Transfer Conference 15

Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins - Vol. 43 '2014 - International Heat Transfer Conference 15

Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts - Vol. 45 '2014 - International Heat Transfer Conference 15

Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids - Vol. 55 '2014 - International Heat Transfer Conference 15

Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids - Vol. 55 '2014 - International Heat Transfer Conference 15

Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling - Vol. 8 '2014 - International Heat Transfer Conference 15

Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement - Vol. 9 '2014 - International Heat Transfer Conference 15

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime - Vol. 9 '2014 - International Heat Transfer Conference 15

EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR - Vol. 13 '2018 - International Heat Transfer Conference 16

HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN THE TRANSITIONAL FLOW REGIME OF TWISTED TAPE INSERT IN A CIRCULAR TUBE WITH RE-ENTRANT INLET - Vol. 13 '2018 - International Heat Transfer Conference 16

HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY - Vol. 14 '2018 - International Heat Transfer Conference 16

CFD SIMULATION OF CONDENSATION INSIDE SMOOTH INCLINED TUBE AT DIFFERENT SATURATION TEMEPRATURES - Vol. 18 '2018 - International Heat Transfer Conference 16

EXPERIMENTAL INVESTIGATION OF CONDENSATION HEAT TRANSFER COEFFICIENTS IN AN INCLINED SMOOTH TUBE AT LOW MASS FLUXES - Vol. 18 '2018 - International Heat Transfer Conference 16

HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS - Vol. 2 '2018 - International Heat Transfer Conference 16

HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER - Vol. 20 '2018 - International Heat Transfer Conference 16

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES - Vol. 6 '2018 - International Heat Transfer Conference 16

CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION - Vol. 7 '2018 - International Heat Transfer Conference 16

EFFECT OF INLET TUBE SPACING ON FRICTION FACTORS IN MULTIPLE CIRCULAR TUBES IN THE TRANSITIONAL FLOW REGIME - Vol. 9 '2018 - International Heat Transfer Conference 16

EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID - Vol. 9 '2018 - International Heat Transfer Conference 16

EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN THE TRANSITIONAL FLOW REGIME OF AN INCLINED SMOOTH TUBE - Vol. 9 '2018 - International Heat Transfer Conference 16

FORCED CONVECTION THERMAL ENTRANCE LENGTH FOR SIMULTANEOUSLY HYDRODYNAMICALLY AND THERMALLY DEVELOPING LAMINAR FLOW AT A CONSTANT HEAT FLUX - Vol. 9 '2018 - International Heat Transfer Conference 16

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID - Vol. 9 '2018 - International Heat Transfer Conference 16

RELATIONSHIP BETWEEN PRESSURE DROP AND HEAT TRANSFER IN SMOOTH HORIZONTAL TUBES - Vol. 9 '2018 - International Heat Transfer Conference 16

TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX - Vol. 9 '2018 - International Heat Transfer Conference 16

Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts - Vol. 43 '2016 - International Journal of Fluid Mechanics Research

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels - Vol. 14 '2007 - Journal of Enhanced Heat Transfer

A STEADY-STATE MODEL FOR THE HIGH-PRESSURE SIDE OF UNITARY AIR-CONDITIONERS - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV

EVALUATING WET COMPRESSION IN REFRIGERATION CYCLES WORKING WITH PURE OR NON-AZEOTROPIC REFRIGERANT MIXTURES FOR AIR-CONDITIONERS - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV

TEMPERATURE CONTROL IN REFRIGERATED TRANSPORT WITH A SNOW BAG - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV

Adewumi, Olayinka Omowunmi

Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins

Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements

Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Le Roux, Willem G.

HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER

EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR

Burger, Francois H.

Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling

Slootweg, M.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Grobler, N.J.M.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Morris, R. M.

MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW

Da Veiga , W. Reinaldo

Abstract of "THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE"

SEMICIRCULAR HEAT EXCHANGERS

THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE

TEMPERATURE CONTROL IN REFRIGERATED TRANSPORT WITH A SNOW BAG

Prinsloo, Francois P.A.

Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)

Khoodaruth, Abdel

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Page , Logan

GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION

Vanderwagen, Calvin P.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Dirker, Jaco

Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors

Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube

Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling

Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow

Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

Aduralere, Timothy T.

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Dellar, Kyle E.

EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR

Ntumba, Tshimanga

The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids

Mahdavi, Mostafa

Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT

Smith, Christo

SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE

Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"

Mahmood, Gazi I.

EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS

Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement

THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS

Ngo, Lloyd C.

Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins

Moll, W.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

de Swardt, C. A.

A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP

Abstract of "A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP"

Bashir, Abubakar Idris

EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN THE TRANSITIONAL FLOW REGIME OF AN INCLINED SMOOTH TUBE

Elahee, M. K.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Giwa, Solomon O.

HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY

Roux, Stephan Michael

EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS

Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement

Malan, Arnaud

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

A FAST MATRIX-FREE IMPLICIT UNSTRUCTURED-HYBRID ALGORITHM FOR MODELLING NON-LINEAR HEAT CONDUCTION

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation

A Matrix-free Implicit Algorithm for Modeling Non-Linear Heat Transfer on Hybrid Unstructured Grids

Pretorius, Leon

MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE

SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS

Obayopo, Surajudeen O.

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Abadi, Seyyed Mohammad Ali Noori Rahim

CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION

CFD SIMULATION OF CONDENSATION INSIDE SMOOTH INCLINED TUBE AT DIFFERENT SATURATION TEMEPRATURES

Everts, Marilize

FORCED CONVECTION THERMAL ENTRANCE LENGTH FOR SIMULTANEOUSLY HYDRODYNAMICALLY AND THERMALLY DEVELOPING LAMINAR FLOW AT A CONSTANT HEAT FLUX

HEAT TRANSFER OF DEVELOPING FLOW IN THE TRANSITIONAL FLOW REGIME

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

RELATIONSHIP BETWEEN PRESSURE DROP AND HEAT TRANSFER IN SMOOTH HORIZONTAL TUBES

TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX

EFFECT OF INLET TUBE SPACING ON FRICTION FACTORS IN MULTIPLE CIRCULAR TUBES IN THE TRANSITIONAL FLOW REGIME

Ewim, Daniel R. E.

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

EXPERIMENTAL INVESTIGATION OF CONDENSATION HEAT TRANSFER COEFFICIENTS IN AN INCLINED SMOOTH TUBE AT LOW MASS FLUXES

Bejan, Adrian

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

Liebenberg, Leon

THE SEARCH FOR OBJECTIVE HEAT TRANSFER AND PRESSURE DROP MODELS FOR FLOW CONDENSATION IN HORIZONTAL TUBES

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

The Characterization of Flow Regimes with Power Spectral Density Distributions of Pressure Fluctuations During Condensation in Smooth and Enhanced Tubes

PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

FLOW PATTERNS DURING CONDENSATION IN SMOOTH AND MICRO-FIN TUBES

Mwesigye, Aggrey

HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS

Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts

Robbins, S.L.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Mulock Houwer, Franscois A.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Oosthuizen, E.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Coetzee, Paul P.

SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE

Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"

Osman, Sohaib

EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID

Dirker, Jaco

THERMAL CHARACTERISATION OF EMBEDDED COOLING LAYERS WITH NEGLIGIBLE THERMAL INTERFACIAL RESISTANCE FOR ORTHOGONAL BI-DIRECTIONAL EXTERNAL HEAT EXTRACTION

Heat Transfer Coefficients in Concentric Annuli

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation

Ji, Tianfu Ji

PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT

Dauhoo, Muhammad Zaid

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

van Staden , M.P.

MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE

SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS

Cramer, L.

THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS

Honiball, R.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Craig, Ken J.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Kotze, Nicola M.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Swanepoel, Wayne

EVALUATING WET COMPRESSION IN REFRIGERATION CYCLES WORKING WITH PURE OR NON-AZEOTROPIC REFRIGERANT MIXTURES FOR AIR-CONDITIONERS

Steyn, Madder

Heat Transfer Coefficients for Tubes in the Turbulent Single Phase Flow Regime with a Focus on Uncertainty

Adelaja, Adecunle O.

Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Markides, Christos N.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Petit , Pascale J.

A STEADY-STATE MODEL FOR THE HIGH-PRESSURE SIDE OF UNITARY AIR-CONDITIONERS

Juggurnath, D.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Wolff, Tamryn M.

HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER

Okafor, Izuchukwu Francis

Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow

Garach, Darshik V.

Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors

Bello-Ochende, Tunde

HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS

Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION

Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins

Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts

Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts

Kotzé, J.C.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Abolarin, Sogo Mayokun

HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN THE TRANSITIONAL FLOW REGIME OF TWISTED TAPE INSERT IN A CIRCULAR TUBE WITH RE-ENTRANT INLET

Ayres, Samantha R.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Sharifpur, Mohsen

Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids

Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT

Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models

HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY

The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids

EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID

Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids

Olakoyejo, Olabode T.

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Winterbach, T.J.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Adio, Saheed Adewale

Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids

Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids

Snyman, J. A.

MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW

Mehrabi, Mehdi

Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models

CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION

Índice A-Z Autores / Editores Mapa semântico Galeria Visual Contribuir Guest