A-Z Index
Heggs, Peter J.
Visiting Professor
P.J.Heggs@leeds.ac.uk
School of Chemical and Process Engineering, University of Leeds, Leeds, UK; Dept of Chem Eng, UMIST, Sackville St., Manchester, M60 1QD
205 Engineering Building University of Leeds Leeds Leeds UNITED KINGDOM
Boiling, Condensation, Heat exchangers, Heat transfer enhancement
University of Leeds, SPEME
September 2008 – Present (8 years 6 months)
University of Leeds
Visiting Reserach Professor
University of Leeds
2008 – Present (9 years)
Emeritus Professor
University of Manchester
2008 – Present (9 years)
Professor of Chemical Engineering
UMIST
1996 – 2004 (8 years)
Professor of Chemical Engineering
Bradford University
May 1986 – May 1994 (8 years 1 month)
Lecturer, Senior Lecturer and Reader in Chemical Engineering
University of Leeds
January 1972 – May 1986 (14 years 5 months)
Senior Process Engineer
Union Carbide Corporation
December 1967 – January 1972 (4 years 2 months)
Narataruksa, P; Pichitvittayakarn, W; Heggs, PJ; Tia, S Fouling behavior of coconut milk at pasteurization temperatures. Applied Thermal Engineering, vol. 30, pp.1387-1395. 2010.
Alane, A; Rodgers, TL; Heggs, PJ Modelling a Vertical Thermosyphon Reboiler Operating Under Vacuum Using Data from Rigorous Experimental Studies in: Pierucci S (editors) ICHEAP-9: 9TH INTERNATIONAL CONFERENCE ON CHEMICAL AND PROCESS ENGINEERING, PTS 1-3, vol. 17, pp.489-494. 2009
Sacramento-Rivero, JC; Heggs, PJ The Evaluation of a Vent Condenser by the Film and Equilibrium Methods for Steam/Air Mixtures in: HEAT TRANSFER ENGINEERING, vol. 30, pp.590-597. 2009.
Sacramento, JC; Heggs, PJ The role of flooding in the design of vent and reflux condensers in: Applied Thermal Engineering, vol. 29, pp.1338-1345. 2009.
Narataruksa, P; Triratana, P; Pana-Suppamassadu, K; Heggs, PJ; Tia, S Dynamic simulation of plate and frame heat exchanger undergoing food fouling: coconut milk fouling case study. ScienceAsia, vol. 34, pp.229-237. 2008.
Cooke, M; Heggs, PJ; Rodgers, TL The efffect of solids on the dense phase gas fraction and gas-liquid mass transfer at conditions close to the heterogeneous regime in a mechanically agitated vessel. Chemical Engineering Research & Design, vol. 86, pp.869-882. 2008.
Ooi, T.H., Benson, H.R.S. and Heggs, P.J., Reflux Condensation under Vacuum of a Methanol/Water Mixture with Plain tube and Tube Inserts, Heat Transfer Engineering, Vol. 26, Number 7, pp. 3 -10, Sept 2005.
Lane, H.J. and Heggs, P.J., Extended Surface Heat Transfer: The Dovetail Fin, Applied Thermal Engineering, Vol. 25, pp. 2555 – 2565, 2005.
Cooke M. and Heggs P.J., Advantages of the Hollow (concave) Turbine for Multi-Phase Agitation under Intense Operating Conditions, Chemical Engineering Science, Vol. 60, pp 5529 – 5543, 2005.
Marin L., Elliott L., Heggs P.J., Ingham D.B., Lesnic D. and Wen X., Parameter identification in two-dimensional fins using the boundary element method, Numerical Heat Transfer Part A: Applications 50(4) 315-344, 2006.
Pichitvittayakarn W., Narataruksa P., Heggs P. J. and Tia S., Effects of Fluid Flow on Coconut Milk Fouling at Pasteurization Temperatures(70-74.5°C), Songklanakarin Journal of Science and Technology, Vol.28 (6), 2006.
Alane A. and Heggs P. J., The Re-Commissioned Thermosyphon Reboiler Research Facility in the Morton Laboratory, WIT Transactions in Engineering Sciences, Vol. 53, pp 337-350, 2006.
Rivero J. C. S. and Heggs P. J., The Re-Commissioning of a Vent and Reflux Condensation Research Facility for Vacuum and Atmospheric Operation, WIT Transactions in Engineering Sciences, Vol. 53, pp 371-380, 2006.
Heggs P. J. and Somasundram I. M., Fin Performance Ratios Greater than Unity: Not Just A Theoretical Aspiration, Applied Thermal Engineering, 27, 951-961, 2007.
Cooke M., Heggs P. J. and Rodgers T. L., The Effect of Solids on the Dense Phase Gas Fraction and Gas-Solid Mass Transfer at Conditions Close to the Heterogeneous Regime in a Mechanically Agitated Vessel, I.Chem.E, Vol.86(8), Part A, Chemical Engineering Research and Design, pp 869-882, 2008.
Narataruksa P., Triatana P., Pana-Suppamassadu K., Heggs P. J. and Tia S., Dynamic Simulation of Plate and Frame Heat Exchangers undergoing Food Fouling: Coconut Milk Fouling Case Study, ScienceAsia, Vol. 34 (2), pp 229-237, 2008.
Sacramento J. C. and Heggs P. J., The Role of Flooding in the Design of Vent and Reflux Condensers, Applied Thermal Engineering, in Press.
Editorial Boards:
Hybrid Methods in Engineering(open in a new tab)
Articles:
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION(open in a new tab) - Vol. 2 '2010(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR(open in a new tab) - Vol. 0 '2015(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION -(open in a new tab) - Vol. 13 '2008(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Two-dimensional Heat Flow through Fin Assemblies(open in a new tab) - Vol. 19 '1981(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Calculation of High Temperature Regenerative Heat Exchangers(open in a new tab) - Vol. 20 '1986(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM(open in a new tab) - Vol. 3 '1997(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
HEAT TRANSFER IN PARTICULATE SYSTEMS THE INFAMOUS FILM HEAT TRANSFER COEFFICIENT(open in a new tab) - Vol. 2 '1994(open in a new tab) - International Heat Transfer Conference 10(open in a new tab)
THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS(open in a new tab) - Vol. 22 '1994(open in a new tab) - International Heat Transfer Conference 10(open in a new tab)
Experimental Study of Separation in Reflux Condensers(open in a new tab) - Vol. 50 '2002(open in a new tab) - International Heat Transfer Conference 12(open in a new tab)
CONDUCTION EFFECTS IN RASCHE TILES(open in a new tab) - Vol. 3 '1970(open in a new tab) - International Heat Transfer Conference 4(open in a new tab)
THE EFFECTS OF PACKING MATERIAL, SIZE AND ARRANGEMENT ON THE PERFORMANCE OF THERMAL REGENERATORS(open in a new tab) - Vol. 4 '1978(open in a new tab) - International Heat Transfer Conference 6(open in a new tab)
THE EFFECTS OF NON-UNIFORM HEAT TRANSFER COEFFICIENTS IN THE DESIGN OF FINNED TUBE AIR-COOLED HEAT EXCHANGERS(open in a new tab) - Vol. 15 '1982(open in a new tab) - International Heat Transfer Conference 7(open in a new tab)
CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM(open in a new tab) - Vol. 5 '1986(open in a new tab) - International Heat Transfer Conference 8(open in a new tab)
DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS(open in a new tab) - Vol. 5 '1986(open in a new tab) - International Heat Transfer Conference 8(open in a new tab)
OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES(open in a new tab) - Vol. 4 '1990(open in a new tab) - International Heat Transfer Conference 9(open in a new tab)
Pop, Ioan
CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM
THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM
Jackson, D. O.
THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS
Davison, P.R.
THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS
Al-Shammari, S. B.
Experimental Study of Separation in Reflux Condensers
Houghton, J. M.
OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES
Bragg, Robert
Experimental Study of Separation in Reflux Condensers
Stones, P. R.
Two-dimensional Heat Flow through Fin Assemblies
THE EFFECTS OF NON-UNIFORM HEAT TRANSFER COEFFICIENTS IN THE DESIGN OF FINNED TUBE AIR-COOLED HEAT EXCHANGERS
Carpenter, K.J.
THE EFFECTS OF PACKING MATERIAL, SIZE AND ARRANGEMENT ON THE PERFORMANCE OF THERMAL REGENERATORS
Bentham, Erik J
HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR
Webb, David R.
Experimental Study of Separation in Reflux Condensers
Edwards, M.F.
THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS
Ingham, Derek B.
OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES
CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM
THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM
Mahmud, Tariq
HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR
Bradean, R.
THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM
Marhoon, Fatma Salman
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION -
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION
Gibbard, I.
Experimental Study of Separation in Reflux Condensers
Senior, Peter R.
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION -
HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION
Gardner, D.
CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM
Baclic, B.S.
DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS
Abou Ziyan, H.Z.Z.
DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS
Kumar, H.
THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS