Guide alphabétique, de la thermodynamique, amplification de chaleur, transfert de masse, et dynamique des fluides
Français English Русский 中文 Português Español Deutsch À propos Comité de rédaction Contactez-nous Accès Begell House
View in Semantic Map View in A-Z Index


Plasma spraying is widely used for coating deposition and advanced material forming. To control the plasma spraying process, one should be able to evaluate on line the key physical process variables, including the bulk temperature of particles (Pfender and Chang, 1998; Moreau, 1998; Fincke et al., 2001; Fauchais, 2004; Fauchais et al., 2006; Streibl et al., 2006). The particle temperature is usually determined experimentally from the ratio of the thermal radiation detected at two closely related wavelengths (two-color pyrometry). As a result, the so-called color temperature is obtained. It the case of a semitransparent particle, the color temperature is int ...

Vous devez souscrire un abonnement pour afficher le texte intégral de l'article.

Si vous êtes déjà abonné (e), veuillez vous identifier ici
Si vous souhaitez vous abonner à THERMOPEDIA™, veuillez en faire la demande ici.

References

  1. Dombrovsky, L. A., Radiation Heat Transfer in Disperse Systems, Begell House, New York and Redding, CT, 1996.
  2. Dombrovsky, L. A. and Ignatiev, M. B., Inclusion of Nonisothermality of Particles in the Calculations and Diagnostics of Two-Phase Jets Used for Spray Deposition of Coatings, High Temp., vol. 39, no. 1, pp. 134–141, 2001.
  3. Dombrovsky, L. A. and Ignatiev, M. B., An Estimate of the Temperature of Semitransparent Oxide Particles in Thermal Spraying, Heat Transfer Eng., vol. 24, no. 2, pp. 60–68, 2003.
  4. Fauchais, P., Understanding Plasma Spraying, J. Phys. D, vol. 37, no. 9, pp. R86–R108, 2004.
  5. Fauchais, P., Montavon, G., Vardelle, M., and Cedelle, J., Developments in Direct Current Plasma Spraying, Surf. Coat. Tech., vol. 201, no. 5, pp. 1908–1921, 2006.
  6. Fincke, J. R., Haggard, D. C., and Swank, W. D., Particle Temperature Measurement in the Thermal Spray Process, J. Thermal Spray Tech., vol. 10, no. 2, pp. 255–266, 2001.
  7. Fiszdon, J. K., Melting of Powder Grains in a Plasma Flame, Int. J. Heat Mass Transfer, vol. 22, no. 5, pp. 749–761, 1979.
  8. Kundas, S. P., Dostanko, A. P., Il'ushenko, A. F., Kuz'menkov, A. N., Lugscheder, E., and Eritt, U., Computer Simulation of Plasma Spraying Process, Bestprint, Minsk. 1998 (in Russian).
  9. Moreau, C., Towards a Better Control of Thermal Spray Process, Proc. of 15th Int. Therm. Spray Conf., Nice, France, x, pp. 1681–1693, 1998.
  10. Pfender, E. and Chang, C. H., Plasma Spray Jets and Plasma-Particulate Interaction: Modeling and Experiments, Proc. of 15th Int. Therm. Spray Conf., Nice, France, x, pp. 315–327, 1998.
  11. Streibl, T., Vaidya, A., Friis, M., Srinivasan, V., and Sampath, S., A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Experimental Results for YSZ, Plasma Chem. Plasma Process., vol. 26, no. 1, pp. 73–102, 2006.
  12. Wan, Y. P., Prasad, V., Wang, G. X., Sampath, S., and Fincke, G. R., Model of Power Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes, ASME J. Heat Transfer, vol. 121, no. 3, pp. 691–699, 1999.
  13. Yoshida, T. and Akasi, K., Particle Heating in a Radio-Frequency Plasma Torch, J. Appl. Phys., vol. 48, no. 6, pp. 2252–2260, 1977.
Nombre de vues : 34125 Article ajouté : 7 September 2010 Dernière modification de l'article : 20 June 2011 © Copyright 2010-2021 Retour en haut de page
Index A-Z Auteur / Rédacteurs Carte sémantique Galerie visuelle Contribuez Guest