А-Я Индекс
Meyer, Josua Petrus
Professor and Head of Department
jpm2@sun.ac.za
https://www.eng.sun.ac.za/prof-meyer/(open in a new tab)
Department of Mechanical and Mechatronic Engineering, Stellenbosch University, Banghoek Rd, Stellenbosch Central, Stellenbosch, 7600, South Africa
Mechanical & Aeronautical Engineering
Stellenbosch University, Banghoek Rd, Stellenbosch Central, Stellenbosch, 7600, South Africa
https://www.eng.sun.ac.za/(open in a new tab)
Transition, Forced convection, Multiphase flows, Flow patterns, Boiling, Solidification, Heat exchangers
July 2002 – Present (13 years 6 months)
Prof Josua P Meyer obtained his B.Eng. (cum laude) 1984, M.Eng. (cum laude) 1986, and his Ph.D. (1988) all in Mechanical Engineering from the University of Pretoria. He is registered as a Professional Engineer and he completed his military service at the Faculty of Military Science, University of Stellenbosch where he lectured aerodynamics for pilots in the South African Air Force. After his two years of military service (1988 – 1989), he accepted a position as Associate Professor in the Department of Mechanical Engineering at North-West University in 1990. He was Acting Head and Professor in Mechanical Engineering before accepting a position as professor in the Department of Mechanical and Manufacturing Engineering at the University of Johannesburg in 1994. He was the Chairperson of Mechanical Engineering from 1999 until the end of June 2002 after which he was appointed as Professor and Head of the Department of Mechanical and Aeronautical Engineering of the University of Pretoria from 1 July 2002. He is Chairperson of the School of Engineering since 1 January 2004. He teaches and conducts research in heat transfer, fluid mechanics and thermodynamics.
Professor and Chair: Mechanical Engineering
University of Johannesburg (Rand Afrikaans University)
June 1994 – June 2002 (8 years 1 month)
Article: Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Conference Paper: Optimisation of Conjugate Elliptical Cooling Channels With Internal Heat Generation
Olabode Thomas Olakoyejo · Tunde Bello-Ochende · Josua Petrus Meyer ·
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013
Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Wall Detached Twisted Tape Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013
Article: Constructal design of combined microchannel and micro pin fins for electronic cooling
O. O. Adewumi · T. Bello-Ochende · J. P. Meyer
International Journal of Heat and Mass Transfer 11/2013; 66:315-323.
Article: Design and optimization of a downhole coaxial heat exchanger for an enhanced geothermal system (EGS)
P. J. Yekoladio · T. Bello-Ochende · J. P. Meyer
Renewable Energy 07/2013; 55:128-137.
Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Energy 05/2013; 53:114–127.
Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Energy 05/2013; 53:114–127.
Article: Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density
Surajudeen Olanrewaju Obayopo · Tunde Bello?Ochende · Josua Petrus Meyer
International Journal of Energy Research 03/2013; 37(3).
Article: Constructal multi scale cylinders with rotation cooled by natural convection
L.G. Page · T. Bello-Ochende · J.P. Meyer ·
International Journal of Heat and Mass Transfer 01/2013; 57(1):345–355.
Article: Constructal flow orientation in conjugate cooling channels with internal heat generation
T. Bello-Ochende · O.T. Olakoyejo · J.P. Meyer · A. Bejan · S. Lorente
International Journal of Heat and Mass Transfer 01/2013; 57(1):241–249.
Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
Energy 10/2012; 46:42–50. ·
Article: Constructal optimisation of conjugate triangular cooling channels with internal heat generation
J.P. Meyer · O.T. Olakoyejo · T. Bello-Ochende ·
International Communications in Heat and Mass Transfer 10/2012; 39(8):1093–1100.
Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer·
Energy 10/2012; 46(1):42–50.
Article: Thermodynamic optimisation of the integrated design of a small?scale solar thermal Brayton cycle
W. G. le Roux · T. Bello?Ochende · J. P. Meyer
International Journal of Energy Research 09/2012; 36(11).
Article: Minimization of thermal resistance in an air cooled porous matrix made up of solid spheres with heat generation
J. Baloyi · T. Bello-Ochende · J.P. Meyer ·
International Communications in Heat and Mass Transfer 08/2012; 39(7):966–970.
Conference Paper: Numerical Study and Optimisation of Channel Geometry and Gas Diffusion Layer of a PEM Fuel Cell
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012
Conference Paper: Optimising the Performance of a PEM Fuel Cell With Transverse Fins Insert in the Channel Flow Using Mathematical Algorithm
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012
Conference Paper: Optimum Small-Scale Open and Direct Solar Thermal Brayton Cycle for Pretoria, South Africa
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology; 07/2012
Conference Paper: Numerical analysis of thermal performance of an externally longitudinally finned receiver for parabolic trough solar collector
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
9th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta; 07/2012
Article: Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow
S.O. Obayopo · T. Bello-Ochende · J.P. Meyer ·
International Journal of Hydrogen Energy 07/2012; 37(13):10286–10298.
International Journal of Thermal Sciences 01/2016; 99:238-257.
Article: Three-dimensional analysis and numerical optimization of combined natural convection and radiation heat loss in solar cavity receiver with plate fins insert
Tunde Bello-Ochende · L.C. Ngo · J.P. Meyer
Energy Conversion and Management 09/2015; 101:757-766.
Article: Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation
H. C. Nolte · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 06/2015; 51(6):875-887.
Article: Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output
E. Jansen · T. Bello-Ochende · J.P. Meyer ·
[Energy 05/2015; 86.
Article: Thermodynamic analysis and performance optimization of organic rankine cycles for the conversion of low-to-moderate grade geothermal heat
P. J. Yekoladio · T. Bello?Ochende · J. P. Meyer ·
International Journal of Energy Research 03/2015; 39(9).
Article: Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Applied Thermal Engineering 02/2015; 77.
Article: Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins
L.C. Ngo · T. Bello-Ochende · J.P. Meyer
Renewable Energy 02/2015; 74:95–105.
Article: Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts
Aggrey Mwesigye · Tunde Bello - Ochende · Josua P. Meyer ·
Applied Energy 12/2014; 136(989):1003.
Conference Paper: Thermal performance of a parabolic trough receiver with perforated conical inserts for heat transfer enhancement
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada; 11/2014
Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
The 15th International Heat Transfer Conference, Kyoto Japan; 08/2014
Conference Paper: Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014
Conference Paper: Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014
Article: Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Energy 08/2014; 73:606-617.
Article: The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer ·
Conference Paper: Thermal and thermodynamic analysis of a parabolic trough receiver at different concentration ratios and rim angles
Aggrey Mwesigye · Willem Gabriel Le Roux · Tunde Bello-Ochende · Josua Petrus Meyer
10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Floria; 07/2014
Article: Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bed adiabatic combustor
J. Baloyi · T. Bello-Ochende · J.P. Meyer
Energy 06/2014; 70.
Dataset: Adewumi, Bello-Ochende and Meyer 2013
Josua P. Meyer · O. O. Adewumi · T. Bello-Ochende
Article: Maximum thermal conductance for a micro-channel, utilising Newtonian and non-Newtonian fluid
M. D. Stocks · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 12/2013; 50(6).
Article: A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer ·
Renewable and Sustainable Energy Reviews 12/2013; 28:677-690.
Статьи:
Editorial Boards:
Journal of Enhanced Heat Transfer(open in a new tab)
Articles:
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES(open in a new tab) - Vol. 5 '2019(open in a new tab) - 4th Thermal and Fluids Engineering Conference(open in a new tab)
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES(open in a new tab) - Vol. 15 '2023(open in a new tab) - 8th Thermal and Fluids Engineering Conference (TFEC)(open in a new tab)
FLOW PATTERNS DURING CONDENSATION IN SMOOTH AND MICRO-FIN TUBES(open in a new tab) - Vol. 0 '2003(open in a new tab) - Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003(open in a new tab)
SEMICIRCULAR HEAT EXCHANGERS(open in a new tab) - Vol. 0 '2003(open in a new tab) - Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003(open in a new tab)
PREFACE: HEFAT2014(open in a new tab) - Vol. 12 '2020(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
IN MEMORIAM: RICHARD J. GOLDSTEIN(open in a new tab) - Vol. 15 '2023(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS 2012(open in a new tab) - Vol. 5 '2013(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS 2012(open in a new tab) - Vol. 5 '2013(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
PREFACE: INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS, 2014(open in a new tab) - Vol. 7 '2015(open in a new tab) - Computational Thermal Sciences: An International Journal(open in a new tab)
HEAT TRANSFER OF DEVELOPING FLOW IN THE TRANSITIONAL FLOW REGIME(open in a new tab) - Vol. 7 '2015(open in a new tab) - First Thermal and Fluids Engineering Summer Conference(open in a new tab)
THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS(open in a new tab) - Vol. 49 '2018(open in a new tab) - Heat Transfer Research(open in a new tab)
EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS(open in a new tab) - Vol. 51 '2020(open in a new tab) - Heat Transfer Research(open in a new tab)
GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION(open in a new tab) - Vol. 0 '2012(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Abstract of "A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP"(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Abstract of "THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE"(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Abstract of "THE PERFORMANCE OF THE REFRIGERANTS R-134a, R290, R404A, R-407c AND R-410A IN AIR CONDITIONERS AND REFRIGERATORS"(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
THE PERFORMANCE OF THE REFRIGERANTS R-134a, R290, R404A, R-407c AND R-410A IN AIR CONDITIONERS AND REFRIGERATORS(open in a new tab) - Vol. 1 '2000(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
A Matrix-free Implicit Algorithm for Modeling Non-Linear Heat Transfer on Hybrid Unstructured Grids(open in a new tab) - Vol. 2 '2004(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
The Characterization of Flow Regimes with Power Spectral Density Distributions of Pressure Fluctuations During Condensation in Smooth and Enhanced Tubes(open in a new tab) - Vol. 2 '2004(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation(open in a new tab) - Vol. 2 '2004(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS(open in a new tab) - Vol. 16 '1998(open in a new tab) - International Heat Transfer Conference 11(open in a new tab)
MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE(open in a new tab) - Vol. 7 '1998(open in a new tab) - International Heat Transfer Conference 11(open in a new tab)
Heat Transfer Coefficients in Concentric Annuli(open in a new tab) - Vol. 10 '2002(open in a new tab) - International Heat Transfer Conference 12(open in a new tab)
A FAST MATRIX-FREE IMPLICIT UNSTRUCTURED-HYBRID ALGORITHM FOR MODELLING NON-LINEAR HEAT CONDUCTION(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
THE SEARCH FOR OBJECTIVE HEAT TRANSFER AND PRESSURE DROP MODELS FOR FLOW CONDENSATION IN HORIZONTAL TUBES(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
THERMAL CHARACTERISATION OF EMBEDDED COOLING LAYERS WITH NEGLIGIBLE THERMAL INTERFACIAL RESISTANCE FOR ORTHOGONAL BI-DIRECTIONAL EXTERNAL HEAT EXTRACTION(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
Heat Transfer in Tubes in the Transitional Flow Regime(open in a new tab) - Vol. 1 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models(open in a new tab) - Vol. 18 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)(open in a new tab) - Vol. 18 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Heat Transfer Coefficients for Tubes in the Turbulent Single Phase Flow Regime with a Focus on Uncertainty(open in a new tab) - Vol. 18 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors(open in a new tab) - Vol. 18 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow(open in a new tab) - Vol. 18 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins(open in a new tab) - Vol. 21 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements(open in a new tab) - Vol. 23 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids(open in a new tab) - Vol. 28 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a(open in a new tab) - Vol. 3 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube(open in a new tab) - Vol. 3 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT(open in a new tab) - Vol. 36 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins(open in a new tab) - Vol. 43 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts(open in a new tab) - Vol. 45 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids(open in a new tab) - Vol. 55 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids(open in a new tab) - Vol. 55 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling(open in a new tab) - Vol. 8 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement(open in a new tab) - Vol. 9 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime(open in a new tab) - Vol. 9 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR(open in a new tab) - Vol. 13 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN THE TRANSITIONAL FLOW REGIME OF TWISTED TAPE INSERT IN A CIRCULAR TUBE WITH RE-ENTRANT INLET(open in a new tab) - Vol. 13 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY(open in a new tab) - Vol. 14 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
CFD SIMULATION OF CONDENSATION INSIDE SMOOTH INCLINED TUBE AT DIFFERENT SATURATION TEMEPRATURES(open in a new tab) - Vol. 18 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
EXPERIMENTAL INVESTIGATION OF CONDENSATION HEAT TRANSFER COEFFICIENTS IN AN INCLINED SMOOTH TUBE AT LOW MASS FLUXES(open in a new tab) - Vol. 18 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS(open in a new tab) - Vol. 2 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER(open in a new tab) - Vol. 20 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES(open in a new tab) - Vol. 6 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION(open in a new tab) - Vol. 7 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
EFFECT OF INLET TUBE SPACING ON FRICTION FACTORS IN MULTIPLE CIRCULAR TUBES IN THE TRANSITIONAL FLOW REGIME(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN THE TRANSITIONAL FLOW REGIME OF AN INCLINED SMOOTH TUBE(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
FORCED CONVECTION THERMAL ENTRANCE LENGTH FOR SIMULTANEOUSLY HYDRODYNAMICALLY AND THERMALLY DEVELOPING LAMINAR FLOW AT A CONSTANT HEAT FLUX(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
RELATIONSHIP BETWEEN PRESSURE DROP AND HEAT TRANSFER IN SMOOTH HORIZONTAL TUBES(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
AN INNOVATIVE EXPERIMENTAL SET-UP FOR ACHIEVING UNIFORM WALL TEMPERATURES IN SIMULTANEOUSLY DEVELOPING FLOW THROUGH A CIRCULAR TUBE(open in a new tab) - Vol. 16 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE(open in a new tab) - Vol. 21 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS(open in a new tab) - Vol. 21 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING(open in a new tab) - Vol. 33 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS(open in a new tab) - Vol. 42 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL(open in a new tab) - Vol. 53 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
FUNDAMENTAL ERRORS IN HISTORICAL STUDIES ON LAMINAR INTERNAL CONVECTION IN CIRCULAR TUBES WITH A UNIFORM HEAT FLUX: NEW PERSPECTIVES(open in a new tab) - Vol. 8 '2023(open in a new tab) - International Heat Transfer Conference 17(open in a new tab)
Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts(open in a new tab) - Vol. 43 '2016(open in a new tab) - International Journal of Fluid Mechanics Research(open in a new tab)
Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels(open in a new tab) - Vol. 14 '2007(open in a new tab) - Journal of Enhanced Heat Transfer(open in a new tab)
A STEADY-STATE MODEL FOR THE HIGH-PRESSURE SIDE OF UNITARY AIR-CONDITIONERS(open in a new tab) - Vol. 0 '2000(open in a new tab) - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV(open in a new tab)
EVALUATING WET COMPRESSION IN REFRIGERATION CYCLES WORKING WITH PURE OR NON-AZEOTROPIC REFRIGERANT MIXTURES FOR AIR-CONDITIONERS(open in a new tab) - Vol. 0 '2000(open in a new tab) - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV(open in a new tab)
TEMPERATURE CONTROL IN REFRIGERATED TRANSPORT WITH A SNOW BAG(open in a new tab) - Vol. 0 '2000(open in a new tab) - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV(open in a new tab)
Adewumi, Olayinka Omowunmi
Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID
Ziskind, Gennady
IN MEMORIAM: RICHARD J. GOLDSTEIN
Fletcher, L.S. "Skip"
IN MEMORIAM: RICHARD J. GOLDSTEIN
Dembele, Siaka
IN MEMORIAM: RICHARD J. GOLDSTEIN
Laubscher, Ryno
FUNDAMENTAL ERRORS IN HISTORICAL STUDIES ON LAMINAR INTERNAL CONVECTION IN CIRCULAR TUBES WITH A UNIFORM HEAT FLUX: NEW PERSPECTIVES
Le Roux, Willem G.
HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER
EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR
Burger, Francois H.
Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling
Vasiliev, Leonard L.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Di Marco, Paolo
IN MEMORIAM: RICHARD J. GOLDSTEIN
Simon, Terrence W.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Slootweg, M.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Grobler, N.J.M.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Morris, R. M.
MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW
Padet, Jacques
IN MEMORIAM: RICHARD J. GOLDSTEIN
Da Veiga , W. Reinaldo
Abstract of "THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE"
SEMICIRCULAR HEAT EXCHANGERS
THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE
TEMPERATURE CONTROL IN REFRIGERATED TRANSPORT WITH A SNOW BAG
Maruyama, Shigenao
IN MEMORIAM: RICHARD J. GOLDSTEIN
Prinsloo, Francois P.A.
Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)
Khoodaruth, Abdel
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Page , Logan
GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION
Vanderwagen, Calvin P.
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime
Dirker, Jaco
Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors
Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube
Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling
Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow
Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)
Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a
Madanan, Umesh
IN MEMORIAM: RICHARD J. GOLDSTEIN
Isaev, Sergey
IN MEMORIAM: RICHARD J. GOLDSTEIN
Aduralere, Timothy T.
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID
Mohamad, Abdulmajeed
IN MEMORIAM: RICHARD J. GOLDSTEIN
Dellar, Kyle E.
EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR
Ntumba, Tshimanga
The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids
Mahdavi, Mostafa
Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT
THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING
Smith, Christo
SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE
Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"
Shafeyeva, Yelena
IN MEMORIAM: RICHARD J. GOLDSTEIN
Mahmood, Gazi
EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS
Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement
THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS
Cervantes, Jaime
IN MEMORIAM: RICHARD J. GOLDSTEIN
Tao, Wen-Quan
IN MEMORIAM: RICHARD J. GOLDSTEIN
Coelho, Pedro J.M.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Minkowycz, Wally J.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Ngo, Lloyd C.
Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins
Wright , D.
CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL
Moll, W.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Kuehn, Thomas
IN MEMORIAM: RICHARD J. GOLDSTEIN
de Swardt, C. A.
A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP
Abstract of "A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP"
Cotta, Renato M.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Kulacki, Francis A.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Srinivasan, Vinod
IN MEMORIAM: RICHARD J. GOLDSTEIN
Egorov, Ivan V.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Bashir, Abubakar Idris
EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN THE TRANSITIONAL FLOW REGIME OF AN INCLINED SMOOTH TUBE
THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS
Elahee, M. K.
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Giwa, Solomon O.
HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY
Tari, Ilker
IN MEMORIAM: RICHARD J. GOLDSTEIN
Modest, Michael F.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Jaluria, Yogesh
IN MEMORIAM: RICHARD J. GOLDSTEIN
Timchenko, Victoria
IN MEMORIAM: RICHARD J. GOLDSTEIN
Arinç, Faruk
IN MEMORIAM: RICHARD J. GOLDSTEIN
Bayazitoglu, Yildiz
IN MEMORIAM: RICHARD J. GOLDSTEIN
Roux, Stephan Michael
EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS
Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement
Zhang, Xing
IN MEMORIAM: RICHARD J. GOLDSTEIN
Malan, Arnaud
OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL
A FAST MATRIX-FREE IMPLICIT UNSTRUCTURED-HYBRID ALGORITHM FOR MODELLING NON-LINEAR HEAT CONDUCTION
Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels
Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation
A Matrix-free Implicit Algorithm for Modeling Non-Linear Heat Transfer on Hybrid Unstructured Grids
Pretorius, Leon
MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE
SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS
Obayopo, Surajudeen O.
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID
Abadi, Seyyed Mohammad Ali Noori Rahim
CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION
CFD SIMULATION OF CONDENSATION INSIDE SMOOTH INCLINED TUBE AT DIFFERENT SATURATION TEMEPRATURES
Everts, Marilize
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS
FORCED CONVECTION THERMAL ENTRANCE LENGTH FOR SIMULTANEOUSLY HYDRODYNAMICALLY AND THERMALLY DEVELOPING LAMINAR FLOW AT A CONSTANT HEAT FLUX
HEAT TRANSFER OF DEVELOPING FLOW IN THE TRANSITIONAL FLOW REGIME
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES
RELATIONSHIP BETWEEN PRESSURE DROP AND HEAT TRANSFER IN SMOOTH HORIZONTAL TUBES
TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX
EFFECT OF INLET TUBE SPACING ON FRICTION FACTORS IN MULTIPLE CIRCULAR TUBES IN THE TRANSITIONAL FLOW REGIME
Ewim, Daniel R. E.
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES
Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a
EXPERIMENTAL INVESTIGATION OF CONDENSATION HEAT TRANSFER COEFFICIENTS IN AN INCLINED SMOOTH TUBE AT LOW MASS FLUXES
Hoffmann , Jaap E.
FUNDAMENTAL ERRORS IN HISTORICAL STUDIES ON LAMINAR INTERNAL CONVECTION IN CIRCULAR TUBES WITH A UNIFORM HEAT FLUX: NEW PERSPECTIVES
Worek, William
IN MEMORIAM: RICHARD J. GOLDSTEIN
Bejan, Adrian
OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL
Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels
Bischof, John
IN MEMORIAM: RICHARD J. GOLDSTEIN
Gross, Ulrich
IN MEMORIAM: RICHARD J. GOLDSTEIN
Wang, Qiuwang
IN MEMORIAM: RICHARD J. GOLDSTEIN
Liebenberg, Leon
THE SEARCH FOR OBJECTIVE HEAT TRANSFER AND PRESSURE DROP MODELS FOR FLOW CONDENSATION IN HORIZONTAL TUBES
OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL
The Characterization of Flow Regimes with Power Spectral Density Distributions of Pressure Fluctuations During Condensation in Smooth and Enhanced Tubes
PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT
Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels
FLOW PATTERNS DURING CONDENSATION IN SMOOTH AND MICRO-FIN TUBES
Steinfeld, Aldo
IN MEMORIAM: RICHARD J. GOLDSTEIN
Yoshida, Hideo
IN MEMORIAM: RICHARD J. GOLDSTEIN
Mwesigye, Aggrey
HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS
Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts
Thome, John
IN MEMORIAM: RICHARD J. GOLDSTEIN
Vishwakarma, Devendra K
THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS
Robbins, S.L.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Lipinski, Wojciech
IN MEMORIAM: RICHARD J. GOLDSTEIN
Mulock Houwer, Franscois A.
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime
Valluri, Prashant
CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL
Oosthuizen, E.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Girshick, Steven
IN MEMORIAM: RICHARD J. GOLDSTEIN
Szmyd, Janusz
IN MEMORIAM: RICHARD J. GOLDSTEIN
Aksan, Alptekin
IN MEMORIAM: RICHARD J. GOLDSTEIN
Sobamowo, Gbeminiyi M
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
Nowak, Andrzej J.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Coetzee, Paul P.
SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE
Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"
Osman, Sohaib
EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID
Dirker, Jaco
THERMAL CHARACTERISATION OF EMBEDDED COOLING LAYERS WITH NEGLIGIBLE THERMAL INTERFACIAL RESISTANCE FOR ORTHOGONAL BI-DIRECTIONAL EXTERNAL HEAT EXTRACTION
Heat Transfer Coefficients in Concentric Annuli
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation
Patankar, Suhas
IN MEMORIAM: RICHARD J. GOLDSTEIN
Ji, Tianfu Ji
PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT
Menguc, M. Pinar
IN MEMORIAM: RICHARD J. GOLDSTEIN
Dauhoo, Muhammad Zaid
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Kotze , O.J.
THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING
Onwuegbusi, Adrian U
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
Cumo, Maurizio
IN MEMORIAM: RICHARD J. GOLDSTEIN
van Staden , M.P.
MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE
SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS
Cramer, L.
THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS
Gbegudu, Joshua K
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
Honiball, R.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Howell, John R.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Smirnov, Evgueni M.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Craig, Ken J.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL
Davidson, Jane H.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Soni, Monaj K
THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS
Tamma, Kumar K.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Manglik, Raj M.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Kotze, Nicola M.
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime
Fisher, Tim
IN MEMORIAM: RICHARD J. GOLDSTEIN
Swanepoel, Wayne
EVALUATING WET COMPRESSION IN REFRIGERATION CYCLES WORKING WITH PURE OR NON-AZEOTROPIC REFRIGERANT MIXTURES FOR AIR-CONDITIONERS
Steyn, Madder
Heat Transfer Coefficients for Tubes in the Turbulent Single Phase Flow Regime with a Focus on Uncertainty
Pui, David Y.H.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Adelaja, Adecunle O.
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS
Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES
Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID
Khalatov, Artem
IN MEMORIAM: RICHARD J. GOLDSTEIN
Dombrovsky, Leonid A.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Zhao, Tianshou
IN MEMORIAM: RICHARD J. GOLDSTEIN
Markides, Christos N.
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Quick , J.
CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL
Petit , Pascale J.
A STEADY-STATE MODEL FOR THE HIGH-PRESSURE SIDE OF UNITARY AIR-CONDITIONERS
Hanjalic, Kemal
IN MEMORIAM: RICHARD J. GOLDSTEIN
Stephan, Peter
IN MEMORIAM: RICHARD J. GOLDSTEIN
Juggurnath, D.
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES
Orlande, Helcio
IN MEMORIAM: RICHARD J. GOLDSTEIN
Wolff, Tamryn M.
HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER
Cheng, Ping
IN MEMORIAM: RICHARD J. GOLDSTEIN
Okafor, Izuchukwu Francis
Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow
Fetuga, Ibrahim A
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
Hernandez-Guerrero, Abel
IN MEMORIAM: RICHARD J. GOLDSTEIN
Webb, Brent W.
IN MEMORIAM: RICHARD J. GOLDSTEIN
Bhattacharyya, Suvanjan
THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS
Garach, Darshik V.
Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors
Bello-Ochende, Tunde
HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS
Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins
OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL
GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION
Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels
Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts
Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts
Kotzé, J.C.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Abolarin, Sogo Mayokun
HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN THE TRANSITIONAL FLOW REGIME OF TWISTED TAPE INSERT IN A CIRCULAR TUBE WITH RE-ENTRANT INLET
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES
Grigoropoulos, Costas
IN MEMORIAM: RICHARD J. GOLDSTEIN
Ayres, Samantha R.
The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime
Sharifpur, Mohsen
Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids
Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT
Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models
HEAT TRANSFER ENHANCEMENT OF DILUTE AL2O3-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY
The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids
THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING
EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID
Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids
Lemonnier, Denis
IN MEMORIAM: RICHARD J. GOLDSTEIN
Olakoyejo, Olabode T.
EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS
NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES
NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID
Winterbach, T.J.
CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES
Adio, Saheed Adewale
Investigation into the pH and Electrical Conductivity Enhancement of Mgo-Ethylene Glycol Nanofluids
Combined Influence of Size and Sonication on Constant Shear Viscosity of MgO-Ethylene Glycol Nanofluids
Snyman, J. A.
MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW
Ramsey, James
IN MEMORIAM: RICHARD J. GOLDSTEIN
Mehrabi, Mehdi
Convective Heat Transfer Characteristics of Low Concentration CuO-Water Nanofluids in the Turbulent Flow Regime Based on an Artificial Intelligence Models
CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION